.

IS Centrifugal Pump

IS Centrifugal Pump
  • IS Centrifugal Pump
供应商: Shi jia zhuang Bojin pump co.,ltd

供应产品
在线联系供应商

Product name:IS Centrifugal Pump

Model:IS Centrifugal Pump

Application:IS clean water pump for industrial and urban water supply, drainage, can also be used for agricultural irrigation and for conveying water or physical and chemical properties similar to water or other liquids, the temperature is not high 80 ℃.

Product overview

IS single-stage single-suction centrifugal pump Overview:
IS clean water pump for industrial and urban water supply, drainage, can also be used for agricultural irrigation and for conveying water or physical and chemical properties similar to water or other liquids, the temperature is not high 80 ℃.
IS single-stage single-suction centrifugal pump Features:
1, IS type and size based on performance to ISO2858 international standard design, mainly by the pump, pump cover, impeller, shaft seal rings, bushings and suspension bearings and other components missing.
2, IS-type pump and pump cover part of the back office split from the impeller, that is commonly referred to as post-formal open structures. The advantage is easy maintenance, repair does not move when the pump, suction line, discharge line and the motor, just remove the spacer coupling intermediate coupling member, you can exit the rotor parts repair.
3, the pump casing (ie, pump and pump cover) constitute the pump studio. Impellers, shafts and rolling bearings as the pump rotor. Suspension bearings support the rotor assembly of the pump, the rolling bearing by radial and axial forces of the pump.
4, in order to balance the axial force of the pump, before most of the pump impeller, the seal ring has a rear, and the rear cover plate is provided in the impeller balance holes, due to force some small shaft, the impeller does not have a seal on the back rings and balance holes.
5, pump axial seal ring is made packing gland, packing rings and packing, etc., in order to prevent water leakage into the air or a lot. If the pump impeller balance is equipped with wadding impeller inlet port communicating with the cavity, impeller inlet of liquid in a vacuum, it is very easy along the sleeve surface of the intake, it is equipped with packing rings in the stuffing cavity through Pump cover the hole, the pump chamber pressure water lead to the packing ring seal. If not pump impeller balance holes, due to the back of the impeller fluid pressure greater than atmospheric pressure, so there is no leakage problems, it is time to install packing rings.
6, to avoid shaft wear, the shaft through the packing chamber parts fitted sleeve protection. There are O-ring seal between the quasi sleeve and the shaft, to prevent mating surfaces along the inlet or leaking.
7, pump drive way is by lengthening the flexible coupling and motor coupled to the rotation direction of the pump from the drive end, clockwise rotation.
IS single-stage single-suction centrifugal pump range of parameters:
Flow rate Q 5.4 ~ 400m3 / s
Head H 4 ~ 125m
IS single-stage single-suction centrifugal pump Model Description:
IS125-100J-315A
Single-stage single-suction centrifugal water pump IS-
125- inlet diameter (mm)
100 discharge outlet diameter (mm)
J-J indicates deceleration use
315- impeller nominal diameter (mm)
AA, B, C, respectively, impeller diameter through the first, second and third cutting
IS single-stage single-suction centrifugal pump sets of range:

Complete supply of pumps, motors, public base, couplings, it also provides bottom valve, check valve, gate valve.

type flow
Q		 range
H		 Rotational speed
n		 Shaft power
Pa		 Electric motor Efficiency
n		 Steam eclipse amount Impeller diameter Imported caliber Outlet diameter WEIGHT
m3/h L/s m r/min kw Power/kw TYPE % m mm mm mm kg
100-80J-160B 43.3 12.03 6 1480 1 1 Y90L-4 71 2.5 147 100 80 79
100-65-200 60
100
120		 16.67
27.78
33.33		 54
520
47		 2980 13.6
17.9
19.9		 22 Y180M-2 65
76
77		 3.0
3.6
4.8		 198 100 65 56
100-65J-200 30
50
60		 8.33
13.89
16.67		 13.5
12.5
11.8		 1480 1.84
2.33
2.61		 4 Y112M-4 60
73
74		 2.0
2.0
2.5		 198 100 65 56
100-65-200A 93.5 25.97 44 2980 15.14 18 Y160L-2 74 3.6 188 100 65 56
100-65J-200A 46.8 13 11 1480 1.97 3 Y100L2-4 71 2.0 188 100 65 56
100-65-200B 86.6 24.06 38 2980 12.45 15 Y160M2-2 72 3.6 177 100 65 56
100-65J-200B 43.3 12.03 9.5 1480 1.62 2 Y100L1-4 69 2.0 177 100 65 56
100-65-250 60
100
120		 16.67
27.78
33.33		 87
80
74.5		 2980 323.4
30.3
33.4		 37 Y200L2-2 61
72
73		 3.5
3.8
4.8		 248 100 65 95
100-65J-250 30
50
60		 8.33
13.89
16.67		 21.3
20
19		 1480 3.16
4
4.44		 5 Y132S-4 55
68
70		 2.0
2.0
2.5		 248 100 65 95
100-65-250A 93.5 25.97 70 2980 25.46 30 Y200L1-2 70 3.8 235 100 65 95
100-65J-250A 46.8 13 17.5 1480 3.38 5 Y132S-4 66 2.0 235 100 65 95
100-65-250B 86.6 24.06 60 2980 20.81 30 Y200L1-2 68 3.8 219 100 65 95
100-65J-250 43.3 12.03 15 1480 2.76 4 Y112M-4 64 2.0 219 100 65 95
100-65-315 60
100
120		 16.67
27.78
33.33		 133
125
118		 2980 39.5
51.6
57.6		 75 Y280S-2 55
66
67		 3.0
3.6
4.2		 307 100 65 130
100-65J-315 30
50
60		 8.33
13.89
16.67		 34
32
30		 1480 5.45
6.92
7.66		 11 Y160-4 51
63
64		 2.0
2.0
2.5		 307 100 65 130
100-65-315A 95.5 26.53 114 2980 46.33 55 Y250M-2 64 3.6 296 100 65 130
100-65J-315A 47.7 13.25 28.5 1480 6.07 7 Y132M-4 61 2.0 296 100 65 130
100-65-315B 90.8 25.22 103 2980 41.08 55 Y250M-2 62 3.6 281 100 65 130
100-65J-315B 45.4 12.61 25.8 1480 5041 7 Y132M-4 59 2.0 281 100 65 130
100-65-315C 85.8 23.83 92 2980 35.83 45 Y225M-2 60 3.6 270 100 65 130


slurry pump China/factory/supplier/manufacturer/exporter, gravel pump China/factory/supplier/manufacturer/exporter,mud pump China/factory/supplier/manufacturer/exporter, desulfurization pump China/factory/supplier/manufacturer/exporter,swage pump China/factory/supplier/manufacturer/exporter, sage pump China/factory/supplier/manufacturer/exporter,centrifugal pump China/factory/supplier/manufacturer/exporter,industry pump China/factory/supplier/manufacturer/exporter


Shi jia zhuang Bojin pump co.,ltd
Contact: Johnny
Address: No.266 Tianshan Street Shijiazhuang,Hebei Province,China
Tel:
Mobile:

Website:
E-mail:
Postal Code: 050035


在线联系供应商

至: Shi jia zhuang Bojin pump co.,ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

PWL Sewage Pump
 PWL Sewage Pump Product name:PWL Sewage Pump Model:PWL Sewage Pump Application:The PWL type pump is stereo type single-stage, single suction centrifugal sewage p...
AH Slurry Pump
 AH Slurry Pump Product name:AH Slurry Pump Model:AH Slurry Pump Application:Used in metallurgy, mining, coal, electricity, building materials and other industri...
PNJ-type Rubber Lined Pump
 PNJ-type Rubber Lined Pump Product name:PNJ-type Rubber Lined Pump Model:PNJ-type Rubber Lined Pump Application:Two pump the same type of structure, but different material,...
SPR Slurry Pump
 SPR Slurry Pump Product name:SPR Slurry Pump Model:SPR Slurry Pump Application:SP, SPR was lower for the next vertical centrifugal slurry pump slurry pump liquid...
ZJL Slurry Pump
 ZJL Slurry Pump Product name:ZJL Slurry Pump Model:ZJL Slurry Pump Application:ZJ series slurry form is divided into two categories, one is ZJ slurry pump for ho...
供应产品

Same products

ZGD螺杆式家用增压泵
 ZGD螺杆式家用增压泵 卖方: 才福泵业有限公司 ZGD螺杆式家用增压泵是一款功能多样、性能可靠的解决方案，专为提升家庭用水压力而设计。该泵采用精密工艺和优质材料制造，运行流畅稳定，可确保满足各种家庭用水需求，提供持续稳定的水流。
V(WQ) One-Way Submersible Sewage Pump
 V(WQ) One-Way Submersible Sewage Pump 卖方: Taizhou Yuansheng Aquacul Ture Machinery Co., Ltd. TheV(WQ) One-Way Submersible Sewage Pumpis designed for wastewater and sewage transfer in residen...
Multi Purpose High Pressure Pump for Water Jet Cleaning
 Multi Purpose High Pressure Pump for Water Jet Cleaning 卖方: Tianjin Harvest High Pressure Pump Co., Ltd 3D2F-S pump is our company's latest patented product with a maximum working pressure of 150...
Water Injection Pump for Tertiary Oil Recovery Applications
 Water Injection Pump for Tertiary Oil Recovery Applications 卖方: Tianjin Harvest High Pressure Pump Co., Ltd This pump is suitable for pipeline cleaning ,workpipe cleaning,sand cleaning,rust removal,l...
Secondary Recovery High flow Pump
 Secondary Recovery High flow Pump 卖方: Tianjin Harvest High Pressure Pump Co., Ltd 3D2C-S series high pressure plunger pump is an improved product of 3D2A-S series high press...