2BE Liquid ring vacuum pump
2BE
CONSTRUCTION TYPE
The 2BE liquid ring are of uncomplicated and robust construction with the following particular features:
non-polluting due to nearly isothermal compression
oil-free, as no lubrication in the working chamber
handling of nearly all gases and vapours
small quantities of entrained liquid can be handled
easy maintenance and reliable operation
low noise and nearly free from vibration
wide choice of material, therefore applicable nearly everywhere
shaft not contact with the medium
protection against cavitation as standard
incorporated dirt drain
incorporated central drain
no metallic contact of the rotating parts
The EMC 2BEare single-stage ones.
APPLICATIONof
Handling and exhausting of dry and humid gases; entrained liquid can be handled during normal duty. The pumps are applied in all fields where a pressure of 33 to 900 mbar must be created by robust vacuum pumps.
NOTE
During operation the pump must continuously be supplied with service liquid, normally water, in order to eliminate the heat resulting from the gas compression and to replenish the liquid ring, because part of the liquid is leaving the pump together with the gas. This liquid can be separated from the gas in a liquid separator (see catalogue part accessories).
It is possible to reuse the service liquid. The pumps are equipped with a device by which the contaminated service liquid can continuously be drained during operation (dirt drain), if necessary.
We are .
The operating data are applicable under the following conditions:
water vapour saturated air: 20°C
service liquid: - water: 15°C
Compression pressure 1013 mbar (atmospheric pressure) ----38V/50HZ
Material design
HT200
SS304
SS316L
Pressure range: 33 to 1013 mbar
Suction volume flow: 600to7500m³/h
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Flame Arresters | The Enardo Detonation represents thebest value in flame arrestor protection. They prevent flamepropagation by absorbing and dissipating heat us... |
 |
MR95 series Industrial Pressure Regulators | Specificationsof This section lists the specifications for the MR95 Series regulators. Factory specification such as type, maximuminlet press... |
 |
Rotary Vane Vacuum Pump | Basic Principle The sucking and exhausting valves are usually fitted in the round pump body where there is a centrifugal rotor with three vanes ... |
 |
Singel-stage rotary van vacuum pump | Basic Principle The sucking and exhausting valves are usually fitted in the round pump body where there is a centrifugal rotor with three va... |
 |
KSB Centrifugal pumps | Everything for your project: the KSB Product Catalogue A unique range of pumps, and services Our comprehensive portfolio has the ideal soluti... |
Похожие товары
 |
Heawy Duty Cantilever Sump Pump -VC(R)/VCH/VCS | Продавец: Hebei TIIEC Machinery Co., Ltd | INDUX®Pump Features INDUX®Vertical, single casing structureslurry pumpsare designed for ... |
 |
pump | Продавец: O&K GROUP LIMITED | Looking for Quality Products? From electronics to home essentials, fashion to industrial supplie... |
 |
WN(Q) Dredging Pump | Продавец: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The dredging pumpis a kind of mud pump developed by our company, which is used for dredging and h... |
 |
IH Stainless Steel Centrifugal Pump | Продавец: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The IH type single-stage single-suction cantilever chemical centrifugal pump is an energy-saving ... |
 |
Horizontal Multistage Pump | Продавец: Shijiazhuang Chongmu Fluid Machine Co., Ltd | Looking for a reliable horizontal multistage pump manufacturerwith high-quality, durable, and exp... |
