Tobee® 100RV-SP Vertical Slurry Pump

• 
• 

Tobee® 100RV-SP Vertical Slurry Pumpis designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.

Design Features:

• Bearing Assembly- The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
• Column Assembly- Completely fabricated from mild steel. The SPR model is elastomer covered.
• Casing- Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
• Impeller- Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
• Upper Strainer- Drop-in metal mesh, snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
• Lower Strainer- Bolted metal or polyurethane for SP, moulded snap-on elastomer for SPR.
• Discharge Pipe- Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
• Submerged Bearings- None

HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |

Другие товары поставщика

	Tobee® Slurry Pump Rubber Throat Bush E4083WRT1R55	Tobee®ush E4083WRT1R55is WRT1 rubber pump wet end parts for 6x4 WRT Series Slurry Pump.Itmakesslurry pump wear to be reduced and maintenance si...
	Tobee® 12/10ST-AHR Rubber Slurry Pump	Tobee®Rubber Lined Slurry Pumps Sealing Arrangement: Packing Seal As one of the most commonly used seals for rotating shafts, the packing seal...
	Tobee® 20/18TU-AHR Rubber Slurry Pump	Tobee® 20/18TU-AHR Rubber Lined Slurry Pumpfeatures a split-casing design with molded, replaceable rubber liners. The molded liner may be speci...
	Tobee® White Ceramic Shaft Sleeve C075J04	Tobee® 4x3C-AH Slurry PumpWhite Ceramic Shaft Sleeve C075J04Wear Parts, It is precision formed of high density alumina, fired, and ground to si...
	Tobee® 12/10F AH Standard Slurry Pumps Bearing Assembly Spares	Tobee® Tobee offers slurry pumpsbearing assembly spare partsfor 1.5/1B-AH, 1.5/1C-HH, 2/1.5B-AH, 3/2C-AH,4/3C-AH, 4/3D-AH, 4/3E-HH, 6/4D-AH, 6/...

Похожие товары

	Cover Plate Liner	Продавец: Hebei TIIEC Machinery Co., Ltd	Cover Plate Liner (Polyurethane Material) is a critical wear part of slurry pumps, installed on t...
	metal impeller	Продавец: Hebei TIIEC Machinery Co., Ltd	High-Performance Impellers for Reliable and Efficient Pumps 1. Function & Material Advantage...
	liebherr hydraulic pump	Продавец: Baoding Dingsen Hydraulic Equipment Sales Co., LTD	liebherr hydraulic pump for construction machinery are a critical part of reliable, high-per...
	Heawy Duty Cantilever Sump Pump -VC(R)/VCH/VCS	Продавец: Hebei TIIEC Machinery Co., Ltd	INDUX®Pump Features INDUX®Vertical, single casing structureslurry pumpsare designed for ...
	pump	Продавец: O&K GROUP LIMITED	Looking for Quality Products? From electronics to home essentials, fashion to industrial supplie...