Tobee® 100RV-SP Vertical Slurry Pump

Tobee® 100RV-SP Vertical Slurry Pumpis designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.

Design Features:

• Bearing Assembly- The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
• Column Assembly- Completely fabricated from mild steel. The SPR model is elastomer covered.
• Casing- Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
• Impeller- Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
• Upper Strainer- Drop-in metal mesh, snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.
• Lower Strainer- Bolted metal or polyurethane for SP, moulded snap-on elastomer for SPR.
• Discharge Pipe- Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
• Submerged Bearings- None

HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |

Other supplier products

	Tobee® 16x14TU-GH High Head Gravel Pump	Tobee® 16x14TU-GH High Head Gravel pumpis designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle s...
	Tobee® Slurry Pump Bearing Assembly B005M for 2x1.5B-AH Slurry Pumps	Tobee®Bearing Assembly B005Mis an important driven parts of the 2x1.5B-AH Slurry Pump.And it is to connect the pump and motor as a complete pum...
	Tobee® 10x8F-G Gravel Pump	Tobee® 10x8F-G Gravel Pumpis the world’s standard for dredge and gravel applications. The range provides excellent wear life while mainta...
	Tobee® 12x10 AH Slurry Pump Parts WG10083WRT1A05 Throatbush Spares	Tobee® The range ofWRT slurry pump partsis interchangeable and retrofitable into all current AH range slurry pumps,Slurry Pump WRT Spare Partsn...
	Tobee® 12/10F-M Slurry Pump	Tobee® 12/10F-M Slurry Pumpis a proven horizontal end suction centrifugal slurry pump that will reliably and economically handle abrasive and c...

供应产品

Same products

	Cover Plate Liner	卖方: Hebei TIIEC Machinery Co., Ltd	Cover Plate Liner (Polyurethane Material) is a critical wear part of slurry pumps, installed on t...
	metal impeller	卖方: Hebei TIIEC Machinery Co., Ltd	High-Performance Impellers for Reliable and Efficient Pumps 1. Function & Material Advantage...
	liebherr hydraulic pump	卖方: Baoding Dingsen Hydraulic Equipment Sales Co., LTD	liebherr hydraulic pump for construction machinery are a critical part of reliable, high-per...
	Heawy Duty Cantilever Sump Pump -VC(R)/VCH/VCS	卖方: Hebei TIIEC Machinery Co., Ltd	INDUX®Pump Features INDUX®Vertical, single casing structureslurry pumpsare designed for ...
	pump	卖方: O&K GROUP LIMITED	Looking for Quality Products? From electronics to home essentials, fashion to industrial supplie...