.

Tobee® 3x2D HH Slurry Pump Spares and Parts

Tobee® 3x2D-HH High Head Slurry Pump Wear Spares and Partsincluding DH2147 Impeller, DH2110 Volute Liner, DH2083 Throatbush, DH2041 Frame Plate Liner Insert.

Slurry Pump Spare Parts namely the pump parts have direct connection with slurries, They are very crucial to the service life of slurry pumps. The wetted parts include impeller, liner, throatbush, frame plate liner insert, casing etc., These parts are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of pump parts, the material plays an important role here.


3x2D-HH Slurry Pump Main parts:


•Bearing assembly DAM005M- A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners- Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers.
•Volute Liner DH2110- Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
•Impeller DH2147- Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
•Throat bush DH2083- Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
•Frame Plate Liner Insert DH2041- Frame plate liner insert forms a pump chamber with throat bush and volute liner where the slurry would flow through them.

Tobee HH High Head Slurry Pumps are end-suction, split-case, centrifugal slurry pumps, Extensive exterior ribbing allows for higher head and higher pressure pumping system, and bulked up wetted end parts can handle the toughest applications, Commonly used for long distance transport lines, The HH pumps can often satisfy working condition with a single pump where others require multiple pumps in series.

HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |


Отправить запрос, связаться с поставщиком

Кому: 776326
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Tobee® 14x12T-G Gravel Pump
Tobee® 14x12T-G Gravel Pump Tobee® 14x12T-G Gravel pumpis designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribu...
Tobee® SPR Rubber Lined Vertical Slurry Pump
Tobee® SPR Rubber Lined Vertical Slurry Pump Tobee®SPR Rubber Lined Vertical Slurry Pumpsare available in various standard lengths to suit common sump depths, for very deep sumps or where ...
Tobee® 10x8R-M Medium Duty Slurry Pump
Tobee® 10x8R-M Medium Duty Slurry Pump Tobee® 10x8R-M Medium Duty Slurry Pumpis designed specifically for successive use in slurry type applications where a large flow at a low to me...
Tobee® Mission 14x12x22 Pump
Tobee® Mission 14x12x22 Pump Tobee® Mission Magnum8x6x18, 12x10x23 and 14x12x22Blender Pumps are ideally suited for pumping high volumes of heavy slurries that are abrasive...
Tobee® Slurry Pump Rubber Throat Bush E4083WRT1R55
Tobee® Slurry Pump Rubber Throat Bush E4083WRT1R55 Tobee®ush E4083WRT1R55is WRT1 rubber pump wet end parts for 6x4 WRT Series Slurry Pump.Itmakesslurry pump wear to be reduced and maintenance si...
Все товары поставщика

Похожие товары

Бытовой повысительный насос для воды ZGD с винтовым механизмом
Бытовой повысительный насос для воды ZGD с винтовым механизмом Продавец: Caifu Pump Industry Co., Ltd. Бытовой повысительный насос для воды ZGD с винтовым механизмом — это универсальное и надежн...
 V(WQ) One-Way Submersible Sewage Pump
V(WQ) One-Way Submersible Sewage Pump Продавец: Taizhou Yuansheng Aquacul Ture Machinery Co., Ltd. TheV(WQ) One-Way Submersible Sewage Pumpis designed for wastewater and sewage transfer in residen...
Multi Purpose High Pressure Pump for Water Jet Cleaning
Multi Purpose High Pressure Pump for Water Jet Cleaning Продавец: Tianjin Harvest High Pressure Pump Co., Ltd 3D2F-S pump is our company's latest patented product with a maximum working pressure of 150...
Water Injection Pump for Tertiary Oil Recovery Applications
Water Injection Pump for Tertiary Oil Recovery Applications Продавец: Tianjin Harvest High Pressure Pump Co., Ltd This pump is suitable for pipeline cleaning ,workpipe cleaning,sand cleaning,rust removal,l...
Secondary Recovery High flow Pump
Secondary Recovery High flow Pump Продавец: Tianjin Harvest High Pressure Pump Co., Ltd 3D2C-S series high pressure plunger pump is an improved product of 3D2A-S series high press...