.

Tobee® 3x2D HH Slurry Pump Spares and Parts

供应商: 776326

供应产品

Tobee® 3x2D-HH High Head Slurry Pump Wear Spares and Partsincluding DH2147 Impeller, DH2110 Volute Liner, DH2083 Throatbush, DH2041 Frame Plate Liner Insert.

Slurry Pump Spare Parts namely the pump parts have direct connection with slurries, They are very crucial to the service life of slurry pumps. The wetted parts include impeller, liner, throatbush, frame plate liner insert, casing etc., These parts are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of pump parts, the material plays an important role here.


3x2D-HH Slurry Pump Main parts:


•Bearing assembly DAM005M- A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners- Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers.
•Volute Liner DH2110- Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
•Impeller DH2147- Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
•Throat bush DH2083- Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
•Frame Plate Liner Insert DH2041- Frame plate liner insert forms a pump chamber with throat bush and volute liner where the slurry would flow through them.

Tobee HH High Head Slurry Pumps are end-suction, split-case, centrifugal slurry pumps, Extensive exterior ribbing allows for higher head and higher pressure pumping system, and bulked up wetted end parts can handle the toughest applications, Commonly used for long distance transport lines, The HH pumps can often satisfy working condition with a single pump where others require multiple pumps in series.

HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |


在线联系供应商

至: 776326
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Tobee® GH High Head Gravel Pump
Tobee® GH High Head Gravel Pump Tobee®GH High Head Gravel Pumpsare Capable of handling large particles at consistently high head, high pressure, long distance, resulting in lo...
Tobee® 8/6E-AHR Rubber lining pump Frame Plate Liner F6036R55
Tobee® 8/6E-AHR Rubber lining pump Frame Plate Liner F6036R55 Tobee® 8/6E-AHR Rubber lined slurry pumps wet end parts,Cover Plate Liner F6018R55, Impeller F6147R55,Frame Plate Liner F6036R55, Throat Bush F...
Tobee® 12x10F-G Gravel Pump
Tobee® 12x10F-G Gravel Pump Tobee® 12x10F-GGravelPumpis a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passa...
Tobee® WRT1 Slurry Pump Wear Parts Throat Bush E4083WRT1R55
Tobee® WRT1 Slurry Pump Wear Parts Throat Bush E4083WRT1R55 Tobee®Slurry Pump Throat bush E4083WRT1R55is used for 6x4 AH Rubber Lined Slurry Pumps.It links plate liners to forms a Pump chamber to work wi...
Tobee® 8x6E-AH Slurry Pump
Tobee® 8x6E-AH Slurry Pump Tobee® 8x6E-AH Slurry Pumpis used for highly abrasive/density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mi...
供应产品

Same products

ZGD螺杆式家用增压泵
ZGD螺杆式家用增压泵 卖方: 才福泵业有限公司 ZGD螺杆式家用增压泵是一款功能多样、性能可靠的解决方案,专为提升家庭用水压力而设计。该泵采用精密工艺和优质材料制造,运行流畅稳定,可确保满足各种家庭用水需求,提供持续稳定的水流。
 V(WQ) One-Way Submersible Sewage Pump
V(WQ) One-Way Submersible Sewage Pump 卖方: Taizhou Yuansheng Aquacul Ture Machinery Co., Ltd. TheV(WQ) One-Way Submersible Sewage Pumpis designed for wastewater and sewage transfer in residen...
Multi Purpose High Pressure Pump for Water Jet Cleaning
Multi Purpose High Pressure Pump for Water Jet Cleaning 卖方: Tianjin Harvest High Pressure Pump Co., Ltd 3D2F-S pump is our company's latest patented product with a maximum working pressure of 150...
Water Injection Pump for Tertiary Oil Recovery Applications
Water Injection Pump for Tertiary Oil Recovery Applications 卖方: Tianjin Harvest High Pressure Pump Co., Ltd This pump is suitable for pipeline cleaning ,workpipe cleaning,sand cleaning,rust removal,l...
Secondary Recovery High flow Pump
Secondary Recovery High flow Pump 卖方: Tianjin Harvest High Pressure Pump Co., Ltd 3D2C-S series high pressure plunger pump is an improved product of 3D2A-S series high press...