Wear Plates (front & rear liner plate)
Product Description
The ofslurry pump is one of the overflow parts of the slurry pump. Due to the transported materials containing various solid particles and acid-base ions, it causes serious wear and corrosion to the overflow parts of the slurry pump. Therefore, there are high wear and corrosion resistance requirements for the overflow parts such as the front guard plate of the slurry pump. At present, the front guard plate of slurry pump is generally made of wear-resistant alloy, rubber, ceramics and polyurethane. The alloy has high hardness and good wear resistance, but poor corrosion resistance. Ceramics have high hardness, wear resistance and corrosion resistance, but they are brittle, so they are difficult to be used in .
In addition, the efficiency of the slurry pump has a great relationship with the gap between the front guard plate and the impeller of the slurry pump. If the gap between them is too large, the volume loss of the slurry pump will increase, which will reduce the flow and head, and then the efficiency of the slurry pump will be reduced. At the same time, if the clearance is too large, it will also affect the shaft seal components, resulting in the increase of the back pressure of the impeller, the failure of the packing seal and the leakage of the slurry, which will greatly shorten the service time of the shaft seal components.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Anti-abrasion Sand Dredger Pump | Product Description As one of , SGB provide sand dredgepumps with high quality. A dredge pump is a horizontal centrifugal pump and is the hear... |
 |
ZJG Series Filter Press Feed Pump | Product Description : The filter press feed pump is to supply slurry to the filter chamber of the filter press. The filtration speed of the fil... |
 |
Horizontal Slurry Pump | Structural Features Single stage, single suction, horizontal centrifugal pump Wet parts such as casing, impeller, liner plate in anti-abrasio... |
 |
Vertical Slurry Pump | Product Description The is a vertical axial suction single-stage single suction centrifugal structure. It is mainly composed of impeller, volute... |
 |
FGD Slurry Recirculation Pump | Product Description Flue-gas (FGD) is a set of technologies used to remove sulfur dioxide (SO2) from exhaust flue gases of fossil-fuel power pla... |
Похожие товары
 |
2be4620 Liquid Ring Vacuum Pump/Water Ring Vacuum Pump | Продавец: Greentech International (Zhangqiu) Co., Ltd | Theapplicationrangeandcharacteristics: The 2BE4 liquid ring vacuum pump and compressor series is... |
 |
2BE3420 Liquid Ring Vacuum Pump/Electric Vacuum Pump | Продавец: Greentech International (Zhangqiu) Co., Ltd | 2BE3 420 Liquid Ring Vacuum PumpThe application range and characteristics:2BE3 series liquid ring... |
 |
2be1 306-1 Liquid Ring Vacuum Pump | Продавец: Greentech International (Zhangqiu) Co., Ltd | 2BE1 306-1 Liquid Ring Vacuum Pump2BE1series liquidring vacuum pumps and compressors are the prod... |
 |
stainless steel submersible pump | Продавец: Zhejiang Huaqi Information Technology Co., LTD | Puming clean water without abrasive particles and liquids that are not chemically to the componen... |
 |
MD Series Anti-Abrasion Multistage Pump | Продавец: Shijiazhuang Industrial Pump Factory Co., Ltd. | The is a centrifugal pump that combines the inlet and outlet sections and the middle section thro... |
