.

Horizontal Overhung One-piece casing Self-Priming Chemical Process Pump

Standards :ISO 13709/API 610 (OH1) / ISO 5199 Operating Parameters : Capacity Q: up to 400 m³/h ( 1760 gpm ) / Head H: up to 250 m ( 820 ft ) / Pressure P: up to 2.5 MPa ( 363 psi ) / Temperature T: -80 to 300 ℃ ( -112 to 572 ℉ )
Features:Standard modularization design / The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position / One-piece casing with integral priming chamber,air separator and volute / From discharge branch DN 80 (3”) and above the casings are provided with a double volute / High-efficiency,Closed impeller with low NPSHr / Full interchangeability with ZA/CZ bearing assembly / Self-priming height :up to 6 m(19 ft) / Accepts multiple seal arrangement / Jack screws (motor side) for an easier alignment setting / Bearing lubrication and cooling options:Oil mist /Fan cooling



Отправить запрос, связаться с поставщиком

Кому: Yantai Shengquan Pump Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Horizontal Overhung Foot mounted Chemical Axial-Flow Pump
Horizontal Overhung Foot mounted Chemical Axial-Flow Pump Standards:GB/T5656-2008 Operating Parameters:Capacity Q: up to 11000 m³/h ( 48430 gpm ) / Head H: up to 5.5 m ( 18 ft ) / Pressure P: up to 0....
API685  Horizontal Overhung Centerline mounted High-Temperature Sealless Magnetic Drive Pump
API685 Horizontal Overhung Centerline mounted High-Temperature Sealless Magnetic Drive Pump Standards :API 685 / ISO 15783 Operating Parameters :Capacity Q: up to 150m³/h ( 660 gpm ) / Head H: up to 220m ( 720 ft ) / Pressure P: up to...
Horizontal Overhung Foot mounted  Blockless Medium-consistency Pulp and Slurry Pump
Horizontal Overhung Foot mounted Blockless Medium-consistency Pulp and Slurry Pump Standards:ShengQuan Operating Parameters : Capacity Q: up to 2000 m³/h ( 8800 gpm ) / Head H: up to 80 m ( 262 ft ) / Pressure P: up to 1.0 MP...
API610 BB2 Horizontal Centerline mounted Single Case Radially Split Petrochemical Process Pump
API610 BB2 Horizontal Centerline mounted Single Case Radially Split Petrochemical Process Pump Standards:ISO 13709/API 610(BB2) Operating Parameters:Capacity Q: up to 2300 m³/h ( 10125 gpm ) / Head H: up to 740 m ( 2430 ft ) / Pressure P...
 API685 Horizontal Overhung Close-Coupled Self-Priming Sealless Magnetic Drive Pump
API685 Horizontal Overhung Close-Coupled Self-Priming Sealless Magnetic Drive Pump Standards:API 685 / ISO 15783 Operating Parameters :Capacity Q: up to 160 m³/h ( 700 gpm ) / Head H: up to 95 m ( 310 ft ) / Pressure P: up to...
Все товары поставщика

Похожие товары

JYG Casting Customizes Investment Casting Pump Parts
JYG Casting Customizes Investment Casting Pump Parts Продавец: Shandong JYG Precision Casting Co., Ltd Shandong Jingyanggang Metal Equipment Co., Ltd. (also called JYG Precision Casting or JYG Casting...
Key Seat Wiper
Key Seat Wiper Продавец: SHANDONG SAIGAO GROUP CORPORATION Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so...
Integral Sprial Heavy Weight Drill Pipe
Integral Sprial Heavy Weight Drill Pipe Продавец: SHANDONG SAIGAO GROUP CORPORATION The drill pipe is the steel pipe with thread at the end, for connecting the drill ground equipmen...
Hydraulic Liner Hanger Tie-Back Assembly
Hydraulic Liner Hanger Tie-Back Assembly Продавец: SHANDONG SAIGAO GROUP CORPORATION The tie-back assembly is a special cementing tool for tieback operation. Tieback equipment allow...
Hydraulic Liner Hanger Polished Bore Receptacle
Hydraulic Liner Hanger Polished Bore Receptacle Продавец: SHANDONG SAIGAO GROUP CORPORATION Hydraulic Liner Hanger Polished Bore ReceptacleMated with tie-back assembly, it can tieback the l...