.

Horizontal Overhung One-piece casing Self-Priming Chemical Process Pump

Standards :ISO 13709/API 610 (OH1) / ISO 5199 Operating Parameters : Capacity Q: up to 400 m³/h ( 1760 gpm ) / Head H: up to 250 m ( 820 ft ) / Pressure P: up to 2.5 MPa ( 363 psi ) / Temperature T: -80 to 300 ℃ ( -112 to 572 ℉ )
Features:Standard modularization design / The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position / One-piece casing with integral priming chamber,air separator and volute / From discharge branch DN 80 (3”) and above the casings are provided with a double volute / High-efficiency,Closed impeller with low NPSHr / Full interchangeability with ZA/CZ bearing assembly / Self-priming height :up to 6 m(19 ft) / Accepts multiple seal arrangement / Jack screws (motor side) for an easier alignment setting / Bearing lubrication and cooling options:Oil mist /Fan cooling



在线联系供应商

至: Yantai Shengquan Pump Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Horizontal Overhung Foot mounted Chemical Axial-Flow Pump
Horizontal Overhung Foot mounted Chemical Axial-Flow Pump Standards:GB/T5656-2008 Operating Parameters:Capacity Q: up to 11000 m³/h ( 48430 gpm ) / Head H: up to 5.5 m ( 18 ft ) / Pressure P: up to 0....
API685 Sealless Vertical In-Line Magnetic Drive Pump
API685 Sealless Vertical In-Line Magnetic Drive Pump Standards :API 685 / ISO 15783 Operating Parameters:Capacity Q: up to 160m³/h ( 700 gpm ) / Head H: up to 150m ( 490 ft ) / Pressure P: up to ...
API610 BB2 Horizontal Centerline mounted Single Case Radially Split Petrochemical Process Pump
API610 BB2 Horizontal Centerline mounted Single Case Radially Split Petrochemical Process Pump Standards:ISO 13709/API 610(BB2) Operating Parameters:Capacity Q: up to 2300 m³/h ( 10125 gpm ) / Head H: up to 740 m ( 2430 ft ) / Pressure P...
API610 VS5 Vertical Cantilever Sump Pump
API610 VS5 Vertical Cantilever Sump Pump Standards: ISO 13709/API 610(VS5) Operating Parameters: Capacity Q: up to 650 m³/h ( 2860 gpm ) / Head H: up to 80 m ( 262 ft ) / Pressure P: ...
API610 BB1 Horizontal Foot mounted Single Case Single Stage Axially Split Chemical Pump
API610 BB1 Horizontal Foot mounted Single Case Single Stage Axially Split Chemical Pump Standards: ISO 13709/API 610(BB1) Operating Parameters :Capacity Q: up to 10000 m³/h ( 44030 gpm ) / Head H: up to 180 m ( 590 ft ) / Pressure...
供应产品

Same products

Key Seat Wiper
Key Seat Wiper 卖方: SHANDONG SAIGAO GROUP CORPORATION Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so...
Integral Sprial Heavy Weight Drill Pipe
Integral Sprial Heavy Weight Drill Pipe 卖方: SHANDONG SAIGAO GROUP CORPORATION The drill pipe is the steel pipe with thread at the end, for connecting the drill ground equipmen...
Hydraulic Liner Hanger Tie-Back Assembly
Hydraulic Liner Hanger Tie-Back Assembly 卖方: SHANDONG SAIGAO GROUP CORPORATION The tie-back assembly is a special cementing tool for tieback operation. Tieback equipment allow...
Hydraulic Liner Hanger Polished Bore Receptacle
Hydraulic Liner Hanger Polished Bore Receptacle 卖方: SHANDONG SAIGAO GROUP CORPORATION Hydraulic Liner Hanger Polished Bore ReceptacleMated with tie-back assembly, it can tieback the l...
Hydraulic Liner Hanger Landing Collar
Hydraulic Liner Hanger Landing Collar 卖方: SHANDONG SAIGAO GROUP CORPORATION The landing collarcomprises housing, ball seat and latch. The latch holds ball seat through pins....