stainless steel Electric open /closed plug valve, honeywell solenoid gas valve
Caliber: DN600-3600
Nominal pressure: 0.05,0.1,0.25 MPa
Applicable temperature: ≤ 250 ℃
Applicable medium: gas and toxic, flammable, toxic gases
Structural characteristics and uses: This valve is fully enclosed shell design, and additional nitrogen protection when operating the gas does not leak out. Using electric or hydraulic actuator driven loosen the clamp and the valve plate sliding switch. Valve plate with free hanging system flexible and reliable; sealed with a clamping device in the form of multi-point synchronization, synchronization, and high reliability. Valve housing is provided on both sides of the manhole. Compaction drive mechanism using sprockets, chains, trapezoidal thread, screw vice simultaneous bidirectional compression. Left and right-handed pinch trapezoidal thread screw synchronization advantages; has a starting torque, self-locking screw vice good, reliable sealing valve pin plate movement adopts gear mechanism, hard fouling meet the dust, poor lubrication conditions, poor working conditions to suit the occasion. This valve can be configured explosion-proof ground control cabinet, the implementation of on-site control and remote control system is connected with the PLC.
Другие товары поставщика
|
|
API brass/steel angle valve china manufacturer,cast iron angle valve flange type |
Specifications 1. Brass body & cartridge(Cu57Pb3), zinc alloy handle, polishing, chrome plated. 2. CE, ISO9000. Technical Requirement: 1. Befor... |
|
|
304 316 stainless steel welded flange, Neck Flanges, Pipe Fittings Forged Flange |
Size: from 1/2 to 24 inch(DN1000-DN6000) Materials: Carbon Steel, Stainless Steel, Alloy Steel Standard: ASME, JIS(KS), ANSI, API, MSS, AWWA, DIN, ... |
|
|
flange welding gate valve,cast iron brass stainless steel gate valve |
Tebon Valve could supply all kinds of gate valve with penumatic actuator and electric actuator.Manual operation, worm turbine drive, gas drive, ele... |
|
|
API ANSI Angle stop valve,3 way bathroom angle stop valve |
1 In the opening and closing process, because the valve flap and valve sealing surface friction than the gate is small, and therefore wear. 2 Turn ... |
|
|
Stainless steel pneumatic cut off Valve,flange connection pneumatic control valve |
Caliber: DN200-1400 Nominal pressure: 0.25,0.6 MPa Applicable temperature: ≤ 250 ℃ Fast opening time :1.5-3 seconds Applicablemedium: gas and to... |
Все товары поставщика
Похожие товары
