.

LN83 Series Cage Guided Globe Control Valve

LN83 Series Cage Guided Globe Control Valve

LN83series are single-seat LN8 series pressure balance control valves, one of the three largest base type products. Cage Guided Globe Control ValveUse separate sleeve, large guide structure, balance pressure sealing ring, high-performance nonmetal sealing ring, has a good dynamic stability, high control precision, allow the pressure difference is big, the operating force is small, large flow capacity, etc. Suitable working condition of normal temperature, differential pressure, under the action of alternating stress control.

Cage Guided Globe Control ValveDescription

Long life

  1. Cage guided globe valveTrims

According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.

  1. Cage guided valvebody

The body of LN8 series control valves consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.

  1. Cage guided valveActuator

The standard mate of LN8 seriesCage guided regulating valveis AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of actuator has a long life cycle with more than 1 million times.

High Precision

LN8 series Cage guided valveare designed strictly on the basis of the IEC standard. Cage guided valveare the latest self-innovated modularized straight stroke control valve of SUPCON. We divide the trims into three modules, namely guide, control and seal module. We provide the best solution according to the function of each module and make action, control and seal more reliable.

Each index, linear, hysteresis, dead zone and leakage, for example, is full compliance with national standards.

Note: For below measured results, take LN8100 top guide single seat valve (PN110) as an example.

Cage guided valvePARAMETERS

Nominal Size

DN40 ~ DN400

Pressure Rating

PN16/25/40/63/100;CL150(PN20)/300(PN50)/600(PN110)

Operateing Temperature

-40℃~ 150℃

Characteristics

Equal percentage, linear, quickly open

Rangeability

50:1

Seat Leakage Class

ANSI B16.104: IV、V、VI

Body Material

WCB/WCC/LCB/LCC;WC6/WC9;CF8/CF8M;4A/5A etc.

Trim Material

630/316/316+ST/316nitriding/316+Ni60/316+WC etc.

Seal Material

PTFE+ graphite v-shaped packing, flexible graphite ring packing, graphite +PTFE braided packing etc.


Отправить запрос, связаться с поставщиком

Кому: Zhejiang SUPCON Fluid Technology Co., Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

LM81 Series High Pressure Globe Control Valve
LM81 Series High Pressure Globe Control Valve LM81 Series High Pressure Globe Control Valve LM81 series are LM8 high accuracy Globe Control Valveseries products, a top guided, plunger type high...
GL Series Discharge Valve suitable for fine chemical and pharmaceutical
GL Series Discharge Valve suitable for fine chemical and pharmaceutical GL Series Discharge Valvesuitable for fine chemicalandpharmaceutical GL series up-spreading/down-spreading discharge valveis a special singleseat r...
LN81W Series Bellows Globe Control Valve
LN81W Series Bellows Globe Control Valve LN81W Series Bellows Globe Control Valve LN81W / 82 series bellows single-seat control valve, based on LN81/82 series valve single-seat non pressur...
LN81 Series Single Seat Globe Control Valve
LN81 Series Single Seat Globe Control Valve LN81 Series Single Seat Globe Control Valve LN81 series are single-seat LN8 series pressure imbalance structure products, one of two basic guide pl...
LN83 Series Cage Guided Globe Control Valve
LN83 Series Cage Guided Globe Control Valve LN83 Series Cage Guided Globe Control Valve LN83series are single-seat LN8 series pressure balance control valves, one of the three largest base ty...
Все товары поставщика

Похожие товары

China Gate valve
China Gate valve Продавец: Yuanda Valve Group Co.,Ltd. China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis...
Gate Valve Vs. Ball Valve
Gate Valve Vs. Ball Valve Продавец: Yuanda Valve Group Co.,Ltd. Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used...
Non Return Valve Suppliers China
Non Return Valve Suppliers China Продавец: Yuanda Valve Group Co.,Ltd. Non Return Valve Suppliers China refers to the opening and closing member for the circular v...
Common Types Of Check Valves
Common Types Of Check Valves Продавец: Yuanda Valve Group Co.,Ltd. Common Types Of Check Valves A is a valve whose switching parts are disc-shaped and rely on ...
Brass ball valve
Brass ball valve Продавец: Yuanda Valve Group Co.,Ltd. Brass ball valve Brass ball valve Applications: Water Supply: Commonly used in residentia...