LN83 Series Cage Guided Globe Control Valve
LN83 Series Cage Guided Globe Control Valve
LN83series are single-seat LN8 series pressure balance control valves, one of the three largest base type products. Cage Guided Globe Control ValveUse separate sleeve, large guide structure, balance pressure sealing ring, high-performance nonmetal sealing ring, has a good dynamic stability, high control precision, allow the pressure difference is big, the operating force is small, large flow capacity, etc. Suitable working condition of normal temperature, differential pressure, under the action of alternating stress control.
Cage Guided Globe Control ValveDescription
Long life
- Cage guided globe valveTrims
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
- Cage guided valvebody
The body of LN8 series control valves consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
- Cage guided valveActuator
The standard mate of LN8 seriesCage guided regulating valveis AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of actuator has a long life cycle with more than 1 million times.
High Precision
LN8 series Cage guided valveare designed strictly on the basis of the IEC standard. Cage guided valveare the latest self-innovated modularized straight stroke control valve of SUPCON. We divide the trims into three modules, namely guide, control and seal module. We provide the best solution according to the function of each module and make action, control and seal more reliable.
Each index, linear, hysteresis, dead zone and leakage, for example, is full compliance with national standards.
Note: For below measured results, take LN8100 top guide single seat valve (PN110) as an example.
Cage guided valvePARAMETERS
|
Nominal Size |
DN40 ~ DN400 |
|
Pressure Rating |
PN16/25/40/63/100;CL150(PN20)/300(PN50)/600(PN110) |
|
Operateing Temperature |
-40℃~ 150℃ |
|
Characteristics |
Equal percentage, linear, quickly open |
|
Rangeability |
50:1 |
|
Seat Leakage Class |
ANSI B16.104: IV、V、VI |
|
Body Material |
WCB/WCC/LCB/LCC;WC6/WC9;CF8/CF8M;4A/5A etc. |
|
Trim Material |
630/316/316+ST/316nitriding/316+Ni60/316+WC etc. |
|
Seal Material |
PTFE+ graphite v-shaped packing, flexible graphite ring packing, graphite +PTFE braided packing etc. |
在线联系供应商
Other supplier products
 |
BN Series Triple Off Set Butterfly Valve | BN Series Triple OffSet Butterfly Valve BN series of triple eccentric butterfly valve, the valve plate adopts three-dimensional eccentric structure... |
 |
GL Series Discharge Valve suitable for fine chemical and pharmaceutical | GL Series Discharge Valvesuitable for fine chemicalandpharmaceutical GL series up-spreading/down-spreading discharge valveis a special singleseat r... |
 |
rotary plug valve | rotary plug valve Rotary Plug Valve A with a plug-shaped flow-restricting component that follows an eccentric path as it rotates. The plug do... |
 |
SN51/52 Series Soft Seal O-type Ball Valve | SN51/52 Series Soft Seal O-type Ball Valve Sn51/52 series soft seal O type ball valveis a full straight through ball valve, the fluid pressure drop... |
 |
LN Series Three-way Globe Control Valve | LN Series Three-way Globe Control Valve LN4133 tee junction level control valve to achieve drip sealing, leakage level VI level, ratio is typically... |
