Manual Flow Balancing Valve
Basic information of Manual Flow Balancing Valve
This valve can adjust the flow easily and accurately, and effectively solve the problems of uneven heating and cooling and hydraulic imbalance in the pipe network system. downloadDof960 series of cases
Features of Manual Flow Balancing Valve
- 2. Handwheel display the number of opening cycles for easy debugging;3. Valve inlet and outlet have self - sealing test port;4. Valve disc self-balancing design, open and close is not affected by pipeline pressure, can be closed completely.
Principle of Manual Flow Balancing Valve
By changing the clearance between the valve core and valve seat (opening), adjust Kv valve flow capacity (valve) to change the flow resistance of flow through the valve in order to achieve the purpose of flow adjustment, the role of the object is the resistance of the system, eliminate the resistance unbalance phenomenon in the system, thus to new water allocation proportion according to the design and calculation of balance, each branch in proportion to increase or decrease at the same time.
Installation and Commissioning of Manual Flow Balancing Valve
There are two methods of selection. The first is to use the software for calculating positive moisture content. The design flow Q and the design pressure difference ∆P are input to obtain the size and balance pre-set position of the balance valve. In order to obtain better accuracy, it is recommended that the positioning of the balance valve be at 50-90% of the opening degree; Secondly, when the design flow Q is known and the design pressure difference ∆P is known, the Kv value can be calculated by the formula, and then the proper balance valve size and predetermined parameters can be selected from the Kv value table. For specific use, please consult ZECO Valve Group.
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
|
Trim |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
|
Measuring Port |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
|
O-Ring |
EPDM / NBR |
ISO 4633 |
|
Handwheel |
Nylon |
ISO 4633 |
|
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys. |
||
Product scope, Standards & Materials of Manual Flow Balancing Valve
Size Range: 2"~16"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy Coating Inspection and Test: ISO 5208 / EN 12226-2
Zhengfeng Valve Group Co., Ltd. is a professionalgate valve manufacturers in china. We provide Control Valve, Balancing Valve, 2 balancing valve, balancing valve with flow meter, manual flow control valves for water, check valveand so on. Want to know more? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Backflow Preventers(Low Pressure) | ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ... | |
| Strainer & Dirt Separator | Strainers, dirt separators and backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thr... | |
| Single Orifice Air Release Valve | Features of single orifice air release valve Can be a large amount of exhaust, improve water efficiency pump Can be a small amount of exhaust... | |
| Gear Operated Gate Valve | Description of Gear Operated Gate Valve: ZECO gear operated gate valve is defined according to the driving mode. Gear operated gate valve is mainly... | |
| Floating Ball Valve | Description of Floating Ball Valve: ZECO floating ball valve chinahas two seats supporting the ball Under medium pressure, the ball can be pressed... |
Похожие товары
| Belaz Dump Truck Parts | Продавец: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Belaz Dump Truck Parts Spare Parts-China Manufacturer and Supplier XTME offers a comprehens... | |
| Komatsu Dump Truck Parts | Продавец: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Komatsu Dump Truck Parts -China Manufacturer and Supplier 100% OEM-Compatible Spare Parts-K... | |
| China Gate valve | Продавец: Yuanda Valve Group Co.,Ltd. | China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis... | |
| Non Return Valve Suppliers China | Продавец: Yuanda Valve Group Co.,Ltd. | Non Return Valve Suppliers China refers to the opening and closing member for the circular v... | |
| Ball Valve | Продавец: Yuanda Valve Group Co.,Ltd. | Ball Valve Yuanda offers Cast Iron Ball Valves JIS 10K that are essential components for flu... |
















