.

Manual Flow Balancing Valve

Basic information of Manual Flow Balancing Valve

This valve can adjust the flow easily and accurately, and effectively solve the problems of uneven heating and cooling and hydraulic imbalance in the pipe network system. downloadDof960 series of cases

Features of Manual Flow Balancing Valve

  1. 2. Handwheel display the number of opening cycles for easy debugging;3. Valve inlet and outlet have self - sealing test port;4. Valve disc self-balancing design, open and close is not affected by pipeline pressure, can be closed completely.

Principle of Manual Flow Balancing Valve

By changing the clearance between the valve core and valve seat (opening), adjust Kv valve flow capacity (valve) to change the flow resistance of flow through the valve in order to achieve the purpose of flow adjustment, the role of the object is the resistance of the system, eliminate the resistance unbalance phenomenon in the system, thus to new water allocation proportion according to the design and calculation of balance, each branch in proportion to increase or decrease at the same time.

Installation and Commissioning of Manual Flow Balancing Valve

There are two methods of selection. The first is to use the software for calculating positive moisture content. The design flow Q and the design pressure difference ∆P are input to obtain the size and balance pre-set position of the balance valve. In order to obtain better accuracy, it is recommended that the positioning of the balance valve be at 50-90% of the opening degree; Secondly, when the design flow Q is known and the design pressure difference ∆P is known, the Kv value can be calculated by the formula, and then the proper balance valve size and predetermined parameters can be selected from the Kv value table. For specific use, please consult ZECO Valve Group.

Part

Material

Standard

Body

Ductile Iron

EN 1563/DIN 1693

Bonnet

CuZn39Pb1 / C37000

EN12167/ASTM B135

Trim

CuZn39Pb1 / C37000

EN12167/ASTM B135

Measuring Port

CuZn39Pb1 / C37000

EN12167/ASTM B135

O-Ring

EPDM / NBR

ISO 4633

Handwheel

Nylon

ISO 4633

For the materials options not listed, consult factory.

ZECO manufactures valves in more than 50 different alloys.

Product scope, Standards & Materials of Manual Flow Balancing Valve

Size Range: 2"~16"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy Coating Inspection and Test: ISO 5208 / EN 12226-2

Zhengfeng Valve Group Co., Ltd. is a professionalgate valve manufacturers in china. We provide Control Valve, Balancing Valve, 2 balancing valve, balancing valve with flow meter, manual flow control valves for water, check valveand so on. Want to know more? Please contact us.


Send product request

To: ZhengFeng Valve Group
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

6 Inch Gate Valve
6 Inch Gate Valve Description of 6 Inch Gate Valve: All casting and forged parts of ZECO 6 flanged gate valve, especially the body and cover two of the main pressure...
3 Inch Butterfly Valve
3 Inch Butterfly Valve Description of 3 Inch Butterfly Valve:ZECO 3 inch butterfly valve/butterfly valve 3 inchis a small diameter butterfly valve, usually manually opera...
Swing Check Valve
Swing Check Valve What is a Swing Check Valve? A Swing Check Valve is desinged to prevent the medium in the pipeline from flowing back. As pressure reaches zero, th...
Top Entry Ball Valve
Top Entry Ball Valve Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf...
Rising Stem Resilient Gate Valve
Rising Stem Resilient Gate Valve The rising stem gate valves produced by ZhengFeng are mainly installed on various pipelines and used as two-way closed-circuit equipment. They are ...
All supplier products

Same products

High-reliability Support ring Y10-4 for power station
"High-reliability Support ring Y10-4 for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "High-reliability Support ring Y10-4 for power station Deyang YOYIK have power plant professional...
Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant
"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant YOYIK professional productio...
High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation
High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Deya...
Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station
Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Is a m...
Class 1500 LB gate valve
Class 1500 LB gate valve Seller: Magpie Valve Packing Gasket Co., Ltd Product Name: Low-EmissionPacking Setfor Class 1500 LB API 6D Gate ValveModel: M600Size: ID 68 mm...