.

12 Inch Butterfly Valve

Description of 12 Inch ButterflyValve:

Most of ZECO 12 inch butterfly valves operated by hand-wheel, wrench and handles, pay attention to the operation speed, neither too fast nor too slow, and exert force at proper position. End position is vital important to valve performance. In Close position, ball shall be at right position to seat. The closure parts of the valve seat so close to the campaign and leave the valve seat, the valve sealing performance depends in part on the relative pieces of stem-driven closure of the valve seat to remain sealed and the resulting mechanical force. If the role of a particular incident in the direction of the closure of the closure of the pressure to close the case up from the seat, and that this power is essential. Most of the internal closure of the sliding piece in the valve seat does not rely on force stem seals, but this type of valve position to close the right thing or not is very important. In some cases, when the closure parts close to the final closed position, the driving force needed to close the case may be greatly increased, to reach the required position has been shut down parts of an auxiliary compression. Close cases are not accessible or not stopped in the customs location will have a seal leak and damage. Butterfly Valves requires right position to guarantee sealing. When the indicator shows Close position, movement shall be stopped. Now the 12 butterfly valve priceis affordable.

Features of 12 Inch Butterfly Valve:

Material of 12 Inch Butterfly Valve:

No

Part

Material

1

Body

ASTM A216 WCB + 13Cr

2

Seal Ring

Graphite + SS304

3

Retainer Flange

ASTM A105

4

Pin

ASTM A276 410

5

Disc

ASTM A216 WCB

6

Stem

ASTM A276 410

7

Stem Packing

Graphite

8

Stem Beating

SS304 + PTFE

9

Bolt

ASTM A193 B7

10

Nut

ASTM A194 2H

11

Yoke

ASTM A216 WCB

In our China valve factory, we have high quality products to customers. If you want to buy our international standard valve, please contact us.



Отправить запрос, связаться с поставщиком

Кому: ZhengFeng Valve Group
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Motorized Ball Valve
Motorized Ball Valve As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand...
Backflow Preventers
Backflow Preventers Basic informationof the fire protection butterfly valvesThisfire protection butterfly valvecan be used to cut off, switch on and adjust the medium ...
Butterfly Valve
Butterfly Valve ZECO is a professional rubber lined butterfly valve manufacturersin China and butterfly valve is main products series of ZECO valve. The rubber lin...
Lug Butterfly Valve
Lug Butterfly Valve Features of Lug Butterfly Valve Low opening torque, Radial dynamic balance sealing system is adopted, so that the forces on both sides of the inle...
Resilient Seated Gate Valve
Resilient Seated Gate Valve Features of resilient seal gate valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movabl...
Все товары поставщика

Похожие товары

Class 300 Valve
Class 300 Valve Продавец: GangYe Group Co.,Ltd. Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
Class 3000 Industrial Valve
Class 3000 Industrial Valve Продавец: GangYe Group Co.,Ltd. Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
Class 2500 Industrial Valve
Class 2500 Industrial Valve Продавец: GangYe Group Co.,Ltd. Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
Class 150 Valve
Class 150 Valve Продавец: GangYe Group Co.,Ltd. globe valve class 150is a pressure rating designation defined by standards organizations, such as...
Class 1500 Industrial Valve
Class 1500 Industrial Valve Продавец: GangYe Group Co.,Ltd. A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...