.

12 Inch Butterfly Valve

Description of 12 Inch ButterflyValve:

Most of ZECO 12 inch butterfly valves operated by hand-wheel, wrench and handles, pay attention to the operation speed, neither too fast nor too slow, and exert force at proper position. End position is vital important to valve performance. In Close position, ball shall be at right position to seat. The closure parts of the valve seat so close to the campaign and leave the valve seat, the valve sealing performance depends in part on the relative pieces of stem-driven closure of the valve seat to remain sealed and the resulting mechanical force. If the role of a particular incident in the direction of the closure of the closure of the pressure to close the case up from the seat, and that this power is essential. Most of the internal closure of the sliding piece in the valve seat does not rely on force stem seals, but this type of valve position to close the right thing or not is very important. In some cases, when the closure parts close to the final closed position, the driving force needed to close the case may be greatly increased, to reach the required position has been shut down parts of an auxiliary compression. Close cases are not accessible or not stopped in the customs location will have a seal leak and damage. Butterfly Valves requires right position to guarantee sealing. When the indicator shows Close position, movement shall be stopped. Now the 12 butterfly valve priceis affordable.

Features of 12 Inch Butterfly Valve:

Material of 12 Inch Butterfly Valve:

No

Part

Material

1

Body

ASTM A216 WCB + 13Cr

2

Seal Ring

Graphite + SS304

3

Retainer Flange

ASTM A105

4

Pin

ASTM A276 410

5

Disc

ASTM A216 WCB

6

Stem

ASTM A276 410

7

Stem Packing

Graphite

8

Stem Beating

SS304 + PTFE

9

Bolt

ASTM A193 B7

10

Nut

ASTM A194 2H

11

Yoke

ASTM A216 WCB

In our China valve factory, we have high quality products to customers. If you want to buy our international standard valve, please contact us.


Send product request

To: ZhengFeng Valve Group
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Gate Valve
Gate Valve The resilient seatedgate valveof ZhengFeng is widely used and reliable in the water supply and drainage system of water supply company, sewage comp...
Clean Water Air Release Valve
Clean Water Air Release Valve Basic informationThis is installed at the highest point of the pipe or where there is a closed air, which is used to discharge the gas in the pipe ...
Pneumatic Butterfly Valve
Pneumatic Butterfly Valve As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan...
 Combination Air Valve
Combination Air Valve Festures of combination air release vacuum valve Suction at negative pressure; Fast exhaust; Exhaust only does not drain; Slightexhaustand larg...
3 Inch Butterfly Valve
3 Inch Butterfly Valve Description of 3 Inch flanged Butterfly Valve: ZECO 3 butterfly valveis a small diameter butterfly valve, usually manually operated, and the connec...
All supplier products

Same products

RV-01A Pressure Relief Valve/Hydraulic Valve
RV-01A Pressure Relief Valve/Hydraulic Valve Seller: Greentech International (Zhangqiu) Co., Ltd Application:1.Usedinringblowerandsuitablebothpressure/vacuumuse.2.Staticpressuresettingeasilyadju...
right valves
right valves Seller: Yuanda Valve Group Co.,Ltd. right valves Selecting the is essential for the efficiency, safety, and reliability of intel...
Water Valve
Water Valve Seller: Yuanda Valve Group Co.,Ltd. Water Valve are critical components in plumbing systems, industrial pipelines, and water d...
Water Valve
Water Valve Seller: Yuanda Valve Group Co.,Ltd. Water Valve are critical components in plumbing systems, industrial pipelines, and water d...
Water Valve
Water Valve Seller: Yuanda Valve Group Co.,Ltd. Water Valve are critical components in plumbing systems, industrial pipelines, and water d...