Pump Control Valve
Festures of pump flow control valve
Slow closing effectively prevents water hammer.
Stop pump stable and save energy
Full port, small fluid resistance
Completely Automatic Operation
Pump Control Valve Working Principle
When the pump is started, the solenoid pilot valve is fully opened after electrification, and adjust the needle valve to the appropriate opening degree, upstream water enters the main valve control room through the pipe and flows out through the solenoid pilot valve, at this point, the pressure of the main valve control room keeps the main valve open and at the appropriate opening degree to keep the normal water supply downstream. When the water pump stops working, the solenoid pilot valve closed after power is cut off, the main valve control room stops to drain, the pressure of the control room rise, the main valve begins to close. When close to 90% position, the upper routing switch of the main valve outputs the stop signal and the pump stops running. At this point, the downstream backwater enters the main valve control room through the pilot pipe, the pressure of the control room increases to close the main valve.
Pump Control Valve Installation and Commissioning
The water pump control valveshall be installed at the outlet of the pump and shall be installed on the pipeline of the one-way flow of the medium. It does not need other devices and energy except using solenoid pilot valve control. For specific use, please consult ZECO Valve Group.
Pump Control Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
If you want to know more about pump control valve functionand pump control valve operation, please visit our website.
As a reliable water valve supplier, we also have types of gate valvefor sale, if you have needs, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Big Size Resilient Gate Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
 |
6 Inch Ball Valve | Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been p... |
 |
Pneumatic Ball Valve | As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan... |
 |
Backflow Preventers | Basic informationof the fire protection butterfly valvesThisfire protection butterfly valvecan be used to cut off, switch on and adjust the medium ... |
 |
Butterfly Valve | ZECO is a professional rubber lined butterfly valve manufacturersin China and butterfly valve is main products series of ZECO valve. The rubber lin... |
Похожие товары
 |
China Yoyik Fluid coupling YOX II 450 for power plant | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Yoyik Fluid coupling YOX II 450 for power plantYOYIK is a hi-tech company specializing in ... |
 |
China Manufacturer Fluid coupling YOX II560 for power station | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Manufacturer Fluid coupling YOX II560 for power stationOur company is equipped with high-p... |
 |
China Yoyik Valve 760N1190B for Electric Company | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Yoyik Valve 760N1190B for Electric CompanyDongfang Yoyik has advanced technology and equip... |
 |
Hydraulic Piston Pump PVH074R01AB10AAE010A | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Manufacturer Hydraulic Piston Pump PVH074R01AB10AAE010A for power generationYOYIK produced... |
 |
Yoyik supply PRESSURE RELIEF DRIVE YSF16-70/130KKJ for turbine generator | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik supply PRESSURE RELIEF DRIVE YSF16-70/130KKJ for turbine generatorIs to use the generator ... |
