Pump Control Valve
Festures of pump flow control valve
Slow closing effectively prevents water hammer.
Stop pump stable and save energy
Full port, small fluid resistance
Completely Automatic Operation
Pump Control Valve Working Principle
When the pump is started, the solenoid pilot valve is fully opened after electrification, and adjust the needle valve to the appropriate opening degree, upstream water enters the main valve control room through the pipe and flows out through the solenoid pilot valve, at this point, the pressure of the main valve control room keeps the main valve open and at the appropriate opening degree to keep the normal water supply downstream. When the water pump stops working, the solenoid pilot valve closed after power is cut off, the main valve control room stops to drain, the pressure of the control room rise, the main valve begins to close. When close to 90% position, the upper routing switch of the main valve outputs the stop signal and the pump stops running. At this point, the downstream backwater enters the main valve control room through the pilot pipe, the pressure of the control room increases to close the main valve.
Pump Control Valve Installation and Commissioning
The water pump control valveshall be installed at the outlet of the pump and shall be installed on the pipeline of the one-way flow of the medium. It does not need other devices and energy except using solenoid pilot valve control. For specific use, please consult ZECO Valve Group.
Pump Control Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
If you want to know more about pump control valve functionand pump control valve operation, please visit our website.
As a reliable water valve supplier, we also have types of gate valvefor sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Ball Check Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
 |
Clean Water Air Release Valve | Basic informationThis is installed at the highest point of the pipe or where there is a closed air, which is used to discharge the gas in the pipe ... |
 |
Electric Ball Valve | Description of Electric Ball Valve:ZECOelectric ball valveis named after the combination of electric actuator and ball valve. It is usually used in... |
 |
Pressure Independent Control Valve | PICV can manually adjust the set flow rate in the pipeline, and also can automatically maintain the pressure difference before and after the valve ... |
 |
Forged Ball Valve | Description of Forged Ball Valve: ZECO forged ball valve is divided into forged two-piece ball valves and forged three-piece ball valves, as well a... |
Same products
 |
"High-reliability Support ring Y10-4 for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "High-reliability Support ring Y10-4 for power station Deyang YOYIK have power plant professional... |
 |
"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant YOYIK professional productio... |
 |
High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Deya... |
 |
Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Is a m... |
 |
Class 1500 LB gate valve | 卖方: Magpie Valve Packing Gasket Co., Ltd | Product Name: Low-EmissionPacking Setfor Class 1500 LB API 6D Gate ValveModel: M600Size: ID 68 mm... |
