.

CHECK VALVES

MstnLand provides high performance vertical check valve upward flowproducts, including Swing check valve, Lifting check valve, Titling check valve, External check valve, Wafer check valve etc.

The disc of valve open or close by medium flow is called check valve which is a kind of automatic valve for one-way flow of the pipeline, that is only allowed medium flows in one direction of the pipeline system. The check valve is used to prevent the backflow of medium, the pump and drive motor reversal and the discharge of the container medium. Check valves should be installed in the pump outlet or front of the control valve for maintaining convenience.

Check Valves Types

The valve that opens or closes by the force of the medium flow to prevent the medium from flowing back is called a check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents. According to the structure, it can be divided into lift check valve, swing check valve and butterfly check valve; according to the material, it can be divided into cast iron check valve, brass check valve, stainless steel check valve, forged steel check valve, cast steel check valve.

Check Valve Working Principle

The check valves functionis to allow the medium to flow in one direction and prevent the flow in the opposite direction. Usually, this kind of valve works automatically. Under the effect of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. It includes a swing check valve and lift check valve. The swing check valve has a hinge mechanism and a valve disc like a door that rests freely on the inclined valve seat surface. In order to ensure that the valve clack can reach the proper position of the valve seat surface every time, the valve clack is designed in a hinge mechanism so that the valve clack has enough space for rotation and makes the valve clack truly and comprehensively contact the valve seat. The valve clack can be made of metal, or it can be inlaid with leather, rubber, or synthetic covering, depending on the performance requirements. When the swing check valve is fully opened, the fluid pressure is almost unimpeded, so the pressure drop through the valve is relatively small. The valve disc of the lift check valve is located on the sealing surface of the valve seat on the valve body. According to the conditions of use, the valve disc can be an all-metal structure, or it can be in the form of a rubber pad or a rubber ring inlaid on the valve disc frame. Like a globe valve, the passage of fluid through the lift check valve is also narrow, so the pressure drop through the lift check valve is larger than that of the swing check valve, and there is little restriction in the flow rate of the swing check valve.

Check Valve Installation

Precautions:

1)Do not allow the check valve to bear weight in the piping system. Large check valves should be independently supported so that they are not affected by the pressure generated by the piping system.

2)When installing, ensure that the direction of the medium flow should be consistent with the direction of the arrow marked on the valve body.

3)The lift-type vertical flap check valve should be installed on the vertical pipeline.

4)The lift-type horizontal flap check valve should be installed on the horizontal pipeline.

As one of control valve manufacturers, we have types of control valve for sale, if you have needs, please contact us.



Отправить запрос, связаться с поставщиком

Кому: MSTN International Technologies Company
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

NON-RISING STEM GATE VALVES
NON-RISING STEM GATE VALVES Non rising stem gate valve drawingis also called rotary stem gate valve (also called non rising stem wedge gate valve). The valve stem nut is set o...
BRASS BALL VALVES
BRASS BALL VALVES BRASS BALL VALVES Brass ball valves refer to ball valves made of brass material as the valve body and ball. Brass is the alloy that is made up of ...
BALANCING VALVE WORKING PRINCIPLE
BALANCING VALVE WORKING PRINCIPLE Balancing valve working principle is about how balance valve works. Balance valve is a dynamic and static balancing valve under hydraulic condition...
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES FULLY WELDED BALL VALVE MstnLand's series of fully welded ball valves can be used to put through or shut off the flow of non-corrosive medium, such...
STAINLESS STEEL GATE VALVES
STAINLESS STEEL GATE VALVES Stainless steel gate valves refers to the lifting movement of the opening and closing body (valve plate) driven by the valve chinastem driving seal...
Все товары поставщика

Похожие товары

Tin Zinc Lead Bronze Rod
Tin Zinc Lead Bronze Rod Продавец: Ningbo Jintian Copper (Group) Co., Ltd., Tin ZincLead Bronze Rod The tin-zinc-lead bronze produced by our company can be used in pipeline...
Tin Phosphor Bronze Strip
Tin Phosphor Bronze Strip Продавец: Ningbo Jintian Copper (Group) Co., Ltd., Tin Phosphor Bronze Strip Copper alloy with Cu-Sn-P as the main alloying element is called tin-p...
Special Shaped Copper Busbar
Special Shaped Copper Busbar Продавец: Ningbo Jintian Copper (Group) Co., Ltd., Special Shaped Copper Busbar The special-shaped bending copper busbars produced by our company a...
Solder Ring Copper Fitting
Solder Ring Copper Fitting Продавец: Ningbo Jintian Copper (Group) Co., Ltd., Solder Ring Copper Fitting A solder ring fitting is a pre-soldered capillary connector for joini...
Profile Rod
Profile Rod Продавец: Ningbo Jintian Copper (Group) Co., Ltd., Profile Rod The special-shaped lock body bar produced by our company has thousands of specificat...