.

CHECK VALVES

MstnLand provides high performance vertical check valve upward flowproducts, including Swing check valve, Lifting check valve, Titling check valve, External check valve, Wafer check valve etc.

The disc of valve open or close by medium flow is called check valve which is a kind of automatic valve for one-way flow of the pipeline, that is only allowed medium flows in one direction of the pipeline system. The check valve is used to prevent the backflow of medium, the pump and drive motor reversal and the discharge of the container medium. Check valves should be installed in the pump outlet or front of the control valve for maintaining convenience.

Check Valves Types

The valve that opens or closes by the force of the medium flow to prevent the medium from flowing back is called a check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents. According to the structure, it can be divided into lift check valve, swing check valve and butterfly check valve; according to the material, it can be divided into cast iron check valve, brass check valve, stainless steel check valve, forged steel check valve, cast steel check valve.

Check Valve Working Principle

The check valves functionis to allow the medium to flow in one direction and prevent the flow in the opposite direction. Usually, this kind of valve works automatically. Under the effect of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. It includes a swing check valve and lift check valve. The swing check valve has a hinge mechanism and a valve disc like a door that rests freely on the inclined valve seat surface. In order to ensure that the valve clack can reach the proper position of the valve seat surface every time, the valve clack is designed in a hinge mechanism so that the valve clack has enough space for rotation and makes the valve clack truly and comprehensively contact the valve seat. The valve clack can be made of metal, or it can be inlaid with leather, rubber, or synthetic covering, depending on the performance requirements. When the swing check valve is fully opened, the fluid pressure is almost unimpeded, so the pressure drop through the valve is relatively small. The valve disc of the lift check valve is located on the sealing surface of the valve seat on the valve body. According to the conditions of use, the valve disc can be an all-metal structure, or it can be in the form of a rubber pad or a rubber ring inlaid on the valve disc frame. Like a globe valve, the passage of fluid through the lift check valve is also narrow, so the pressure drop through the lift check valve is larger than that of the swing check valve, and there is little restriction in the flow rate of the swing check valve.

Check Valve Installation

Precautions:

1)Do not allow the check valve to bear weight in the piping system. Large check valves should be independently supported so that they are not affected by the pressure generated by the piping system.

2)When installing, ensure that the direction of the medium flow should be consistent with the direction of the arrow marked on the valve body.

3)The lift-type vertical flap check valve should be installed on the vertical pipeline.

4)The lift-type horizontal flap check valve should be installed on the horizontal pipeline.

As one of control valve manufacturers, we have types of control valve for sale, if you have needs, please contact us.



在线联系供应商

至: MSTN International Technologies Company
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

REGULATING VALVES
REGULATING VALVES REGULATING VALVES Hydraulic oil pressure regulatorare classified on the basis of their nominal capacity as medium-flow, small-flow, and microflow ...
ECCENTRIC BUTTERFLY VALVES
ECCENTRIC BUTTERFLY VALVES Butterfly valves whose stem axis deviates from the center of the disc and the center of the body at the same time, and the sealing pair is an obliq...
BALL VALVES
BALL VALVES BALL VALVES As one of pneumatic ball valve suppliers, MstnLand provides high performance ball valve products, including Trunnion mounted ball valv...
Waste Water Valve
Waste Water Valve Water is among the world’s most essential natural resources. Just as it aids in the development of human life and agricultural products, wate...
BUTTERFLY VALVES
BUTTERFLY VALVES Butterfly Valves for Sale MstnLand provides high performance butterfly valve products, including Hard seal and soft seal butterfly valve, triple o...
供应产品

Same products

Pneumatic Plug Control Valve
Pneumatic Plug Control Valve 卖方: China MFRS Control Valve Manufacturer Co., Ltd. Our manufacturing facility excels in producing Pneumatic Actuated Plug Control Valves that are de...
Electric Actuator Globe Control Valve
Electric Actuator Globe Control Valve 卖方: China MFRS Control Valve Manufacturer Co., Ltd. Enhance your industrial process with our Multi-Turn Electric Actuator Globe Control Valves, metic...
3 Way Ball Control Valve
3 Way Ball Control Valve 卖方: China MFRS Control Valve Manufacturer Co., Ltd. s a leading Three Way Ball Control Valve Supplier, we offer precision-engineered valves in sizes ...
Ductile Iron Foot Valve Flange End
Ductile Iron Foot Valve Flange End 卖方: Hebei Leading Metals & Piping Industries Co., Ltd. A ductile iron foot valveis a kind of energy-saving valve. It is generally installed at the botto...
Dismantling Joints
Dismantling Joints 卖方: Hebei Leading Metals & Piping Industries Co., Ltd. The pipe dismantling jointare double flanged fittings that accommodate up to longitudinal adjustm...