Butterfly Valve

• 

ZECO is a professional rubber lined butterfly valve manufacturersin China and butterfly valve is main products series of ZECO valve. The rubber lined concentric butterfly valve is widely used in various kinds of operating conditions because compare to other valves it cost lower and required installation space is smaller. Centerlined butterfly valves are usually used in water supply pipeline.

What is a butterfly valve?

Butterfly valve is a kind of adjusting valve of simple body construction, can be use for open/close or flow control purpose for low pressure pipeline.

The shutter for butterfly valve is a round plate, disc open/close centre to valve stem which is the center line of valve body as well.

Butterfly valve can be used in various kinds of application like water, waste water, seawater, air, mud, oil and corrosive service ect.. In many kinds of low pressure pipeline of shuoff/flow adjusting application, butterfly valve can be used to replace gate valve, globe valve or ball valve which would save the cost for user.

Butterfly valve is available for quick open/close, easy to operated, low flow resistance and suitable for high frequency open/close. ZECO centerlined butterfly valve is bi-directional for seat sealing can be installed at either direction of pipeline, sealing performance is reliable and the rubber seat is replaceable.

Butterfly Valve Selection Guidance

Butterfly valve, especially centerlined butterfly valve is ually made of ductile iron body, which means the valve is suitable for low pressure pipeline but not suitable for high pressure pipeline. To choose a suitable butterfly valve, we need to consider below factors:

Size and pressure, due to it's advantage of simple contruction, butterfly valve are available of big size till 120" or even much bigger. It should be noticed that the bigger butterfly valve size is, the lower pressure it can bear. So, big size butterfly valve can only be conisdered for low pressure pipeline.

Most common used material for centerlined butterfly valve body is ductile iron, carbon steel may also be used as body material for some specific application.

Centerlined butterfly valve don"t have individual seat, the seat is lined on the internal body.While choosing seat material for concentric butterfly valve, we should consider the temperature, fluid medium and pressure, commonly used seat material are EPDM, NBR, NR ect..

The most important part for choosing butterfly valve is to choose its disc material, for example, water and waste water can use ductile iron disc with nickel plated, seawater can use al-bronze as disc material, ect..

Stem of centerlined butterfly valve don"t have contact with the fluid, so we don"t have to consider the corrosion issue, so normal martensitic stainless steel is enough.

Water Control Solutions

ZECO has professional solutions to optimize water usage, reuduce costs and maximize energy efficiently.

As one of theexperienced water valve suppliers. We provide hvac gate valve, high performance triple offset butterfly valve, check valve, etc. Contact us to know butterfly valve installation orientationor butterfly valve specification standard.

Другие товары поставщика

	Backflow Preventers	The problem of contaminated water due to backflow is emerging, and the health hazards caused by contaminated water are also alarming to engineers a...
	Balancing Valve	ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Y...
	Backflow Preventers	Basic informationThis big dirt separatorvalve is used for water purification.Features1. Easy to operate；2. No water stop is required to clean the c...
	Backflow Preventers	The concentricbutterfly valveis characterized by the stem center, disc center and body center in the same position. Such structures are simple to m...
	Dynamic Balancing Valve	Festures of Dynamic Balancing Valve No external energy is required for automatic flow regulation; Automatically adjust equipment or pipeline flow...

Похожие товары

	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...