Stainless Steel Butterfly Valve
Description of Stainless Steel Butterfly Valve:
ZECO stainless steel butterfly valve is a kind of butterfly valve with high performance and long service life. It is mainly composed of driving device and stainless steel parts. The valve body, butterfly disc and inner parts are made of stainless steel. Although stainless steel butterfly valve is produced with high quality materials, if the installation is not proper, no matter how good the material is, it will cause problems or have worse effect than the product of ordinary material with good maintenance. So valve installation is the key factor to affect valves’life-extension. Mal installation will reduce the valve performance. So following instructions shall be confirmed before installation.(a)Carefully unpacking the cases, read the material, specification, tags and so on to make sure the valve is qualified to install; (b) Do pay attention to the warnings on a valve tag, and following instructions; (c)Check the flow direction mark, if the valve is marked with flow direction, valve must be installed as per this direction; (d)Check to find if the valve tunnel is clean, safe and without any corrosive substances. Get rid of packing and stuffing which blocks movement of a valve; (e)Check if piping to connect valve are clean. If not, clean before installation.ZECO is one of the leading ss butterfly valves suppliersin China.
Features of Stainless Steel Butterfly Valve:
- SSbutterfly valvecombines the three offsets of the seating surface with the flexibility of graphite lamination to achieve a tight and uniform seal with a low required torque;
Material of Stainless Steel Butterfly Valve:
No |
Part |
Material |
1 |
Body |
ASTM A351 CF8 |
2 |
Seal Ring |
Graphite + SS304 |
3 |
Retainer Flange |
ASTM A182 F304 |
4 |
Pin |
ASTM A276 304 |
5 |
Disc |
ASTM A351 CF8 |
6 |
Stem |
ASTM A276 304 |
7 |
Stem Packing |
Graphite |
8 |
Stem Beating |
SS304 + PTFE |
9 |
Bolt |
ASTM A193 B8 |
10 |
Nut |
ASTM A194 8 |
11 |
Yoke |
ASTM A216 WCB |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Flange Globe Valve | Category: Globe Valve Description Globe stop valveprovide superior performance and reliability in a wide range of applications. What is a Fl... | |
Butterfly Valve | ZECO is a professional rubber lined butterfly valve manufacturersin China and butterfly valve is main products series of ZECO valve. The rubber lin... | |
Forged Ball Valve | Description of Forged Ball Valve: ZECO forged ball valve is divided into forged two-piece ball valves and forged three-piece ball valves, as well a... | |
Backflow Preventers | Basic informationof the big size gate valve This valve is used in the pipeline as a cut-off valve. Features Principle The big sizeresilient gate va... | |
Concentric Butterfly Valve | The concentric butterfly valve is characterized by the stem center, disc center and body center in the same position. Such structures are simple to... |
Похожие товары
Tin Zinc Lead Bronze Rod | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Tin ZincLead Bronze Rod The tin-zinc-lead bronze produced by our company can be used in pipeline... | |
Tin Phosphor Bronze Strip | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Tin Phosphor Bronze Strip Copper alloy with Cu-Sn-P as the main alloying element is called tin-p... | |
Special Shaped Copper Busbar | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Special Shaped Copper Busbar The special-shaped bending copper busbars produced by our company a... | |
Solder Ring Copper Fitting | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Solder Ring Copper Fitting A solder ring fitting is a pre-soldered capillary connector for joini... | |
Profile Rod | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Profile Rod The special-shaped lock body bar produced by our company has thousands of specificat... |