Miniature Peristaltic Pump

• 

Miniature Peristaltic Pumpshead is very high cost performance model for small flow rate applications like the micro peristaltic pumps, small layout, 4 rollers structure and easy tubing replacement make it very welcomed by medical and lab equipment, flexible block designs enable it self-adapt to different tube sizes in a wide range.

Specification of

Fitting Peristaltic Tubing of Miniature Peristaltic Pump

How Do Micro Peristaltic Pumps Work?

The mini peristaltic pumps are low-pressure product pumps, the general working pressure does not exceed 0.7Mpa, and the large peristaltic pump (hose pump) can reach more than 1Mpa. The miniature peristaltic pump alternately squeezes and releases the elastic delivery hose of the pump, so that the peristaltic pump draws fluid. Just like pinching and squeezing a hose with two fingers, the hose moves with the fingers, and the liquid creates a negative pressure in the hose. There are many types of fluids transmitted by micro peristaltic pumps, not only fluids with particles, but also fluids with strong acids, strong bases and strong organic solvents. You only need to choose a hose suitable for the fluid.

What Are the Advantages of Using Micro Peristaltic Pumps?

How to Maintain a Micro Peristaltic Pump?

The composition of the mini peristaltic pumps is divided into three components: the driver, the pump head, and the hose. During use, the hose is consumable and needs to be replaced regularly. The driver and pump head are maintenance-free parts, and only need to be dry and cleaned daily. Work without special maintenance.

In the use of the miniature peristaltic pump head, the common damages include the following situations, which need to be paid attention to during use: First, the speed is too high, exceeding the design speed requirements of the pump head; Second, accidental fall from high altitude, resulting in deformation or damage of the pump head; Third, the leakage of the hose causes the liquid to enter the rollers of the pump head and the main shaft bearing, and damage the bearings.

Другие товары поставщика

	Peristaltic Metering Pump	Peristaltic metering pump is an intelligent peristaltic pump that be able to preset dispensing volume, dispensing time, cycle times, waiting time t...
	Female Luer to Barbed Adapters	Female Luer to Barbed Adapters Female luer lock to barb connectorsprovide a convenient way to connect flexible tubing ID 1/16" to 1/4" with produc...
	Flangeless Fittings	Flangeless Fittingsbenefits a lot for low pressure and gastight removable systems which comes with a nut and a ferrule as a unit set to connect rig...
	Teflon Tubing	Teflon tubing is kind of thin wall biocompatible clear rigid tube in its natural FEP or PTFE colors, they have strict tolerance requirements on inn...
	Peristaltic Pump Head	Peristaltic Pump Head is the most important part for a full unit peristaltic liquid pump, it is responsible to drive the suitable tubes to reach th...

Похожие товары

	Клапан	Продавец: RongTengXinNuo(Tianjin) International Trade Co.,Ltd	Клапан
	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...