DIN CAST IRON FLANGED GLOBE VALVE

DIN CAST IRON FLANGED GLOBE VALVE

MstnLand runs a qualified cast iron globe valve factoryin China. Our ductile iron globe valve series is mainly used for cutting off or connecting the medium in the pipeline, generally not used for regulating the flow.

Body material:	Grey cast iron GG25
Size range:	DN15～300
Pressure rating:
Operating temperature:	-10～200℃
End connection:	Flanged
Applicable medium:	Water, Sewage, Steam, Oil
Mode of operation:	Manual
Applicable industry:	Water & Water Treatment
	Power generation
	Pulp & Paper
	Municipal
Design & Manufacture:	API, ASME, ASTM, ANSI, BS, DIN, JIS, ISO, GB

DIN Cast Iron Flanged Globe Valve Features

MSTNLAND is not only among China's top cast iron gate valves manufacturers, we also provides high qiality cast iron globe valves. Cast Iron GlobeValve, also called water globe valve.It is specially designed to suit for transportation,distribution and extraction system in water, air, oil and gas industry.Their bodies are made from ductile iron or cast iron and have integral flanges which are available in two basic types;non-rising stem Inside Screw and rising stem Outside Screw and Yoke type. The inside screw type has the stem actuating thread within the pressure envelope and is non-rising. This type of valve is usually used for non corrosive and reasonably clean services and has a smaller overall height than the outside screw type. The outside screw, rising stem type has the stem actuating thread outside the pressure envelope and can be used on more active media where the fluid might otherwise have an adverse affect on the thread. The cast iron globe valve is used often in applications like Heating, water distribution and water at Min and max Temperatures between - 10°C to + 120°C. Cast iron globe valvesare avaiable for use in commercial and industrial applications. Typical services include hot and cold water, HVAC, and other general utility services. That's why cast iron flanged globe valves are common valves used in sewage treatment plant.

DIN Cast Iron Flanged Globe Valve Installation and Commissioning

Installation and commissioning

Thoroughly clean and prepare the piping system before valve installation.

Remove the valve end caps if present, and inspect the valve ports and seating

surfaces for cleanliness just prior to installation.

Support the valve to prevent unnecessary stresses induced by connecting pipe.

Be sure the rating of the valve is compatible with the intended service conditions. Recommended

aptitude is with the stem in the vertical position. Horizontal stem installations can present issues for

larger valves, especially in reduced pressure service such as low pressure(5-35 psi) steam.

Bolt flange in line per recommendations of applicable ASME/ANSI standard, e.g. ASME/ANSI

Operate the valve from the full open to closed position.

Verify the tightness of the packing nut/gland after installation.

Recommended installation: Stem in the vertical position with operator on top.

Notice:

Globe valves work in one direction only. Keep this in mind when you’re installing the valve. Proper installation means less wear and tear on the valve over time.

Mount the valve vertically on the pipe with the handwheel pointing up. This puts the working parts of the assembly under less pressure.

Never overtighten the handwheel. Overtightening puts added pressure on the gland packing. If there are issues with leaks, it means there’s a problem with the seat or the plug.

Другие товары поставщика

	GATE VALVES	GATE VALVES As one oftrustworthy gate valves suppliersin China, MstnLand provides high performance different types of gate valve products, mainly ...
	CAST IRON FILTER	CAST IRON FILTER Cast iron filteris an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of press...
	WAFER TYPE CONCENTRIC BUTTERFLY VALVE	concentric butterfly valve for sale sewage concentric butterfly valve MstnLand wafer type concentric butterfly valve for sale are widely used in w...
	FULLY WELDED BALL VALVES	FULLY WELDED BALL VALVE MstnLand's series of fully welded ball valves can be used to put through or shut off the flow of non-corrosive medium, such...
	NON-RISING STEM GATE VALVES	Non rising stem gate valves Anti-theft Type Soft-sealing Gate Valve Cast Iron Internal Thread Non-rising Stem Gate Valve Underground Installed Typ...

Все товары поставщика

Похожие товары

	"High-reliability Support ring Y10-4 for power station	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"High-reliability Support ring Y10-4 for power station Deyang YOYIK have power plant professional...
	"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant YOYIK professional productio...
	High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Deya...
	Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Is a m...
	Class 1500 LB gate valve	Продавец: China LiCB AC DC EV Charger Co., Ltd	Product Name: Low-EmissionPacking Setfor Class 1500 LB API 6D Gate ValveModel: M600Size: ID 68 mm...