DIN CAST IRON FLANGED GLOBE VALVE

DIN CAST IRON FLANGED GLOBE VALVE

MstnLand runs a qualified cast iron globe valve factoryin China. Our ductile iron globe valve series is mainly used for cutting off or connecting the medium in the pipeline, generally not used for regulating the flow.

Body material:	Grey cast iron GG25
Size range:	DN15～300
Pressure rating:
Operating temperature:	-10～200℃
End connection:	Flanged
Applicable medium:	Water, Sewage, Steam, Oil
Mode of operation:	Manual
Applicable industry:	Water & Water Treatment
	Power generation
	Pulp & Paper
	Municipal
Design & Manufacture:	API, ASME, ASTM, ANSI, BS, DIN, JIS, ISO, GB

DIN Cast Iron Flanged Globe Valve Features

MSTNLAND is not only among China's top cast iron gate valves manufacturers, we also provides high qiality cast iron globe valves. Cast Iron GlobeValve, also called water globe valve.It is specially designed to suit for transportation,distribution and extraction system in water, air, oil and gas industry.Their bodies are made from ductile iron or cast iron and have integral flanges which are available in two basic types;non-rising stem Inside Screw and rising stem Outside Screw and Yoke type. The inside screw type has the stem actuating thread within the pressure envelope and is non-rising. This type of valve is usually used for non corrosive and reasonably clean services and has a smaller overall height than the outside screw type. The outside screw, rising stem type has the stem actuating thread outside the pressure envelope and can be used on more active media where the fluid might otherwise have an adverse affect on the thread. The cast iron globe valve is used often in applications like Heating, water distribution and water at Min and max Temperatures between - 10°C to + 120°C. Cast iron globe valvesare avaiable for use in commercial and industrial applications. Typical services include hot and cold water, HVAC, and other general utility services. That's why cast iron flanged globe valves are common valves used in sewage treatment plant.

DIN Cast Iron Flanged Globe Valve Installation and Commissioning

Installation and commissioning

Thoroughly clean and prepare the piping system before valve installation.

Remove the valve end caps if present, and inspect the valve ports and seating

surfaces for cleanliness just prior to installation.

Support the valve to prevent unnecessary stresses induced by connecting pipe.

Be sure the rating of the valve is compatible with the intended service conditions. Recommended

aptitude is with the stem in the vertical position. Horizontal stem installations can present issues for

larger valves, especially in reduced pressure service such as low pressure(5-35 psi) steam.

Bolt flange in line per recommendations of applicable ASME/ANSI standard, e.g. ASME/ANSI

Operate the valve from the full open to closed position.

Verify the tightness of the packing nut/gland after installation.

Recommended installation: Stem in the vertical position with operator on top.

Notice:

Globe valves work in one direction only. Keep this in mind when you’re installing the valve. Proper installation means less wear and tear on the valve over time.

Mount the valve vertically on the pipe with the handwheel pointing up. This puts the working parts of the assembly under less pressure.

Never overtighten the handwheel. Overtightening puts added pressure on the gland packing. If there are issues with leaks, it means there’s a problem with the seat or the plug.

Other supplier products

	NON-RISING STEM GATE VALVES	Non rising stem gate valves Anti-theft Type Soft-sealing Gate Valve Cast Iron Internal Thread Non-rising Stem Gate Valve Underground Installed Typ...
	FULLY WELDED BALL VALVES	MstnLand's series of fully welded ball valvescan be used to put through or shut off the flow of non-corrosive medium, such as water (≤200℃), ste...
	REGULATING VALVES	REGULATING VALVES Pressure self regulating valveare classified on the basis of their nominal capacity as medium-flow, small-flow, and microflow va...
	RISING STEM GATE VALVES	Rising gate valveproduced by MstnLand, a China gate valves manufacturer, can be used in many situations. The opening and closing part of a rising s...
	CAST IRON BALL VALVES	CAST IRON FLANGED BALL VALVE MstnLand's series of Cast iron ball valve chinais used for opening and closing of pipeline with non-corrosive medium....

供应产品

Same products

	Male Thread Nickel Plated Brass Butterfly Ball Valve	卖方: Zhejiang Huibo Valve Technology Co., Ltd.	Male Thread Nickel Plated Brass Butterfly Ball Valve Material: Brass Body, Brass Bonnet, brass ba...
	4800030000 For daewoo,evobus,mercedes-benz,paccar foot brake valve	卖方: Zhuji Oubote Auto Parts Co., Ltd.	4800030000 foot brake valve are attached to the brake pedal. This isthe valve that actually start...
	Aluminum Gas Valve	卖方: Dong Guan ABYDA Gas Valve Co., Ltd	Product Specification:1. Raw Material: Al Alloy + solid brass + Mild steel;2. Applicable for LPG,...
	Yoyik supply Fan slider S4GA8814 for turbine generator	卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	Yoyik supply Fan slider S4GA8814 for turbine generator Is a major production of Dongfang Yoyik. D...
	API 6A FC Slab Gate Valve	卖方: China JSC Valve Manufacturer Group Co., Ltd.	FC gate valve adopts a non-rising stem, slab gate, full-size conduit design, floating slab gate a...