GATE VALVES
GATE VALVES
As one oftrustworthy gate valves suppliersin China, MstnLand provides high performance different types of gate valve products, mainly include bolted bonnet wedge gate valves and pressure seal bonnet gate valves, which are widely used in gas, petrochemical, oil, offshore, power station and refining industries.
The gate in the industrial gate valve is for opening and closing purposes. Its motion direction is perpendicular to the direction of fluids. The gate valve can only be fully opened and fully closed, and can not be used for flow regulation. Therefore, when the types of gate valve is fully open, the flow channel is straight-through and the pressure loss difference is minimum. So gate valves can be used in many conditions.
Brass Gate Valves
As a professional gate valve supplier in China, Mstnland provides high-quality brass gate valves for customers to choose from.
Cast Iron Gate Valves
MstnLand provides high performance gate valve products, mainly include bolted bonnet wedge gate valves and pressure seal bonnet gate valves, which are widely used in gas, petrochemical, oil, offshore, power station and refining industries.
Cast Steel Gate Valves
According to the material, cast steel gate valves can be divided into carbon steel gate valve, stainless steel gate valve, low alloy steel gate valve, low temperature steel gate valve, etc. Various specific steel grades are commonly used under various cast steel gate valves as follows: 1. The grades of carbon steel gate valve are: WCA, WCB, WCC, LCB, etc.; the applicable temperature is -46 degrees to 425 degrees. 2. Stainless steel gate valve grades: 301 stainless steel, CF8 stainless steel, CF8M stainless steel, etc.; the applicable temperature is -198 degrees to 816 degrees. 3. Low-alloy steel is divided into high-temperature alloy steel and high-strength low-alloy steel, among which high-temperature alloy steel is often referred to as chrome-molybdenum steel. Casting grades of chrome molybdenum steel gate valve: ZG1Cr5Mo, ZG15Cr1MoV, ZG20CrMoV, WC6, WC9, C12A, etc. The applicable temperature is 550 degrees to 750 degrees.
Forged Steel Gate Valves
According to different materials, forged steel gate valves can be classified as: carbon steel, stainless steel, duplex stainless steel, alloy and other special materials. According to different nominal pressure classes, forged steel gate valves can be classified as: Class150, Class 300, Class 400, Class 600, Class 800, Class 900, Class 1500 and Class 2500. MstnLand forged steel gate valves are mostly reduced bore design, compared with the same size cast steel gate valve, the amount of flow is slightly smaller, but the pressure and temperature range are higher than the cast steel valve. Its sealing performance is much better than the cast steel gate valve. It has a longer service life and the flow direction of the medium is not restricted.
Stainless Steel Gate Valves
According to sealing surface allocation, stainless gate valve can be divided into wedge gate valve and parallel disc valve. wedge gate valve can be also divided to single disc, double disc and flexible disc . Parallel disc valve can be divided into single disc and double disc. It can be divided into rising stem gate valve and non-rising stem gate valve based on the thread location.
Rising Stem Gate Valves
As a valve supplier in China, Mstnland provides high-quality rising stem gave valves for customers to choose from.
Non-rising Stem Gate Valves
As one of the most professional non-rising stem gate valve manufacturers in China, Mstnland provides different kinds of non-rising stem gate valves for customers to choose from.
Double Disk Parallel Gas Gate Valves
As one of the most professional double disc gate valve manufacturers in China, Mstnland provides different kinds of double disk parallel gas gate valves for customers to choose from.
Knife Gate Valves
As one of the most professional knife gate valve suppliers in China, Mstnland offers three kinds of knife gate valve for customers to choose from.
Bellows Sealed Gate Valves
As a valve supplier in China, Mstnland provides high-quality bellows sealed gate valves for customers to choose from.
Types of Gate Valves Based on Material
When selecting the gate valve, you should pay more attention to the valve body material which should be determined by the actual working conditions such as temperature, pressure & medium. We are a professional Chinese gate valve manufacturer who supplies gate valves made of stainless steel, wcb, carbon steel, forged, cryogenic, etc. And based on the body materials, you can find different types of gate valvesare for sale now in Mstnland.
Cast Iron Gate Valves
MstnLand provides high performance gate valve products, mainly include bolted bonnet wedge gate valves and pressure seal bonnet gate valves, which are widely used in gas, petrochemical, oil, offshore, power station and refining industries.
Cast Steel Gate Valves
According to the material, cast steel gate valves can be divided into carbon steel gate valve, stainless steel gate valve, low alloy steel gate valve, low temperature steel gate valve, etc. Various specific steel grades are commonly used under various cast steel gate valves as follows: 1. The grades of carbon steel gate valve are: WCA, WCB, WCC, LCB, etc.; the applicable temperature is -46 degrees to 425 degrees. 2. Stainless steel gate valve grades: 301 stainless steel, CF8 stainless steel, CF8M stainless steel, etc.; the applicable temperature is -198 degrees to 816 degrees. 3. Low-alloy steel is divided into high-temperature alloy steel and high-strength low-alloy steel, among which high-temperature alloy steel is often referred to as chrome-molybdenum steel. Casting grades of chrome molybdenum steel gate valve: ZG1Cr5Mo, ZG15Cr1MoV, ZG20CrMoV, WC6, WC9, C12A, etc. The applicable temperature is 550 degrees to 750 degrees.
Forged Steel Gate Valves
According to different materials, forged steel gate valves can be classified as: carbon steel, stainless steel, duplex stainless steel, alloy and other special materials. According to different nominal pressure classes, forged steel gate valves can be classified as: Class150, Class 300, Class 400, Class 600, Class 800, Class 900, Class 1500 and Class 2500. MstnLand forged steel gate valves are mostly reduced bore design, compared with the same size cast steel gate valve, the amount of flow is slightly smaller, but the pressure and temperature range are higher than the cast steel valve. Its sealing performance is much better than the cast steel gate valve. It has a longer service life and the flow direction of the medium is not restricted.
Stainless Steel Gate Valves
According to sealing surface allocation, stainless gate valve can be divided into wedge gate valve and parallel disc valve. wedge gate valve can be also divided to single disc, double disc and flexible disc . Parallel disc valve can be divided into single disc and double disc. It can be divided into rising stem gate valve and non-rising stem gate valve based on the thread location.
Brass Gate Valves
As a professional gate valve supplier in China, Mstnland provides high-quality brass gate valves for customers to choose from.
Types of Gate Valves Based on Structure
Based on the structure, the gate valve can be divided into rising stem gate valve and non-rising stem gate valve. According to the difference of disk form and structure, gate valve can be further divided into wedge gate valve, parallel disk gate valve, single disk gate valve and double parallel disk gate valve. The parallel disk are mostly solid while the wage includes both solid and flexibility.
Rising Stem Gate Valves
As a valve supplier in China, Mstnland provides high-quality rising stem gave valves for customers to choose from.
Non-rising Stem Gate Valves
As one of the most professional non-rising stem gate valve manufacturers in China, Mstnland provides different kinds of non-rising stem gate valves for customers to choose from.
Double Disk Parallel Gas Gate Valves
As one of the most professional double disc gate valve manufacturers in China, Mstnland provides different kinds of double disk parallel gas gate valves for customers to choose from.
Knife Gate Valves
As one of the most professional knife gate valve suppliers in China, Mstnland offers three kinds of knife gate valve for customers to choose from.
Bellows Sealed Gate Valves
As a valve supplier in China, Mstnland provides high-quality bellows sealed gate valves for customers to choose from.
Gate Valves Working Principle
The opening and closing part of gate valve is a flashboard. Its direction of motion is perpendicular to the direction of fluid. A gate valve is usually used to cut off the medium. The entire flow channel is a straight-through passage when gate valve is fully open, and the pressure loss of the medium running is minimum. Gate valve is usually divided into several types by seal part mode, such as wedge gate valve, plate gate valve, parallel 2-flashboard gate valve and wedge 2-flashboard gate valve. Gate valve is usually used under working conditions in which the valve is not opened or closed frequently, and supports flashboard fully open or fully closed. It's not suitable for adjustment or throttling. Various materials may be selected for transportation of water, steam, oil, natural gas, nitric acid, acetic acid, oxidant and urea.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
CAST IRON FILTER | Cast iron filteris an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of pressure reducing valve... |
 |
CAST IRON GATE VALVES | CAST IRON GATE VALVES MstnLand, as one ofprofessional cast iron gate valves suppliers, provides high performance gate valve products, mainly inc... |
 |
CAST IRON BALL VALVES | CAST IRON FLANGED BALL VALVE MstnLand's series of Cast iron ball valves is used for opening and closing of pipeline with non-corrosive medium. Sp... |
 |
NON-RISING STEM GATE VALVES | Non rising stem gate valve drawingis also called rotary stem gate valve (also called non rising stem wedge gate valve). The valve stem nut is set o... |
 |
BALANCING VALVE WORKING PRINCIPLE | Balancing valve working principle is about how balance valve works. Balance valve is a dynamic and static balancing valve under hydraulic condition... |
Похожие товары
 |
Male Thread Nickel Plated Brass Butterfly Ball Valve | Продавец: Zhejiang Huibo Valve Technology Co., Ltd. | Male Thread Nickel Plated Brass Butterfly Ball Valve Material: Brass Body, Brass Bonnet, brass ba... |
 |
4800030000 For daewoo,evobus,mercedes-benz,paccar foot brake valve | Продавец: Zhuji Oubote Auto Parts Co., Ltd. | 4800030000 foot brake valve are attached to the brake pedal. This isthe valve that actually start... |
 |
Aluminum Gas Valve | Продавец: Dong Guan ABYDA Gas Valve Co., Ltd | Product Specification:1. Raw Material: Al Alloy + solid brass + Mild steel;2. Applicable for LPG,... |
 |
Yoyik supply Fan slider S4GA8814 for turbine generator | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | Yoyik supply Fan slider S4GA8814 for turbine generator Is a major production of Dongfang Yoyik. D... |
 |
API 6A FC Slab Gate Valve | Продавец: China JSC Valve Manufacturer Group Co., Ltd. | FC gate valve adopts a non-rising stem, slab gate, full-size conduit design, floating slab gate a... |
