NON-RISING STEM GATE VALVES

NON-RISING STEM GATE VALVES

Non rising stem gate valve drawingis also called rotary stem gate valve (also called non rising stem wedge gate valve). The valve stem nut is set on the gate, and the handwheel rotation drives the valve stem to rotate, so as to lift the gate. Generally, there are trapezoidal threads at the bottom end of the valve stem. Through the thread at the bottom end of the valve and the guide groove on the valve disc, the rotary motion is changed into linear motion, that is, the operating torque is changed into the operating thrust. When the non rising stem gate valve is opened, when the lifting height of the ram is equal to 1:1 of the valve diameter, the fluid channel is completely unblocked, but in operation, this position cannot be monitored. In actual use, the apex of the valve stem is used as the mark, that is, the position that can not be opened is used as its full open position. In order to consider the lock phenomenon of temperature change, usually in the open to the top position, and then back 1 / 2 ~ 1 turn, as the full open valve position. Therefore, the full open position of the valve is determined by the position of the RAM (i.e. stroke).

Custom Types of Non-rising Stem Gate Valves for Sale

As one of the most professional non rising stem gate valve manufacturersin China, Mstnland provides different kinds of non-rising stem gate valves for customers to choose from.

Cast Iron Internal Thread Non-rising Stem Gate Valve

Cast Iron Clamp Type Non-rising Stem Soft-sealing Gate Valve

Cast Iron Non-rising Stem Soft-sealing Gate Valve

Worm Gear Non-rising Stem Wedge Gate Valve

Rising Stem Gate Valve vs Non Rising Stem Gate Valve

Non Rising Stem Gate ValvesFeatures

The advantages of non rising stem gate valves: the height of the gate valve always remains unchanged, so the installation space is small. It is suitable for gate valves with large diameter or limited installation space. This kind of structure should be equipped with opening and closing indicator to indicate the opening and closing degree.

The disadvantage of non rising stem gate valves: the stem thread is not only unable to be lubricated, but also directly subject to medium erosion, easy to damage.

Non Rising Stem Gate Valves Selection

Non rising stem gate valves can use wedge-shaped plugs or parallel plates. Plugs usually seal both the up and downstream sides of the valve while plates usually only seal on the upstream face. Wedges can take on a variety of design alternatives that reduce or accommodate wear of the sealing surfaces. Although the advantage of gate valves is their reduced head loss when open compared to globe valves, they are not useful for throttling and may not produce the positive shut-off that globe valves provide. Non rising stem gate valves are used in wastewater plants, power plants, and process plants for shut-off and for isolating service.

If you want to know more kinds of chemical valves, please visit our website.

Другие товары поставщика

	CAST IRON GATE VALVES	MstnLand, as one ofprofessional cast iron gate valves suppliersand cast iron gate valves manufacturers, provides high performance gate valve produc...
	CAST IRON FILTER	Cast iron filteris an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of pressure reducing valve...
	GATE VALVES	GATE VALVES As one ofdouble disc gate valve manufacturersin China, MstnLand provides high performance parallel gateproducts, mainly include bolted...
	LIFT CHECK VALVES	Lift check valves refer to a valve that automatically opens and closes the valve flap by relying on the flow of the medium itself to prevent the ba...
	CAST IRON BALL VALVES	Cast Iron Flanged Ball Valve Cast Iron Internal Thread Ball Valve CAST IRON FLANGED BALL VALVE MstnLand's series of Cast iron ball valves is u...

Все товары поставщика

Похожие товары

	Check Valve, 600 LB, 1/2 Inch, Piston type, Bolted Cap	Продавец: China Valmax Valve Co., Ltd.	China Check Valve manufacturer Valmax supplies Check Valves with the body, bonnet, disc, and se...
	Check Valve, 900 LB, 1/2 Inch, RF, Pressure Seal Cap	Продавец: China Valmax Valve Co., Ltd.	China Check Valve manufacturer Valmax supplies Check Valves with the body, bonnet, disc, and se...
	Check Valve, 600 LB, 1/2 Inch, Piston type, Bolted Cap	Продавец: China Valmax Valve Co., Ltd.	China Check Valve manufacturer Valmax supplies high-quality Check Valves, with the body, bonnet...
	Combination angle valve	Продавец: Zhejiang Huaqi Information Technology Co., LTD	Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ...
	Multifunctional hydraulic control valve	Продавец: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD	Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:...