.

NON-RISING STEM GATE VALVES

NON-RISING STEM GATE VALVES

Non rising stem gate valve drawingis also called rotary stem gate valve (also called non rising stem wedge gate valve). The valve stem nut is set on the gate, and the handwheel rotation drives the valve stem to rotate, so as to lift the gate. Generally, there are trapezoidal threads at the bottom end of the valve stem. Through the thread at the bottom end of the valve and the guide groove on the valve disc, the rotary motion is changed into linear motion, that is, the operating torque is changed into the operating thrust. When the non rising stem gate valve is opened, when the lifting height of the ram is equal to 1:1 of the valve diameter, the fluid channel is completely unblocked, but in operation, this position cannot be monitored. In actual use, the apex of the valve stem is used as the mark, that is, the position that can not be opened is used as its full open position. In order to consider the lock phenomenon of temperature change, usually in the open to the top position, and then back 1 / 2 ~ 1 turn, as the full open valve position. Therefore, the full open position of the valve is determined by the position of the RAM (i.e. stroke).

Custom Types of Non-rising Stem Gate Valves for Sale

As one of the most professional non rising stem gate valve manufacturersin China, Mstnland provides different kinds of non-rising stem gate valves for customers to choose from.

Cast Iron Internal Thread Non-rising Stem Gate Valve

Cast Iron Clamp Type Non-rising Stem Soft-sealing Gate Valve

Cast Iron Non-rising Stem Soft-sealing Gate Valve

Worm Gear Non-rising Stem Wedge Gate Valve

Rising Stem Gate Valve vs Non Rising Stem Gate Valve

Non Rising Stem Gate ValvesFeatures

The advantages of non rising stem gate valves: the height of the gate valve always remains unchanged, so the installation space is small. It is suitable for gate valves with large diameter or limited installation space. This kind of structure should be equipped with opening and closing indicator to indicate the opening and closing degree.

The disadvantage of non rising stem gate valves: the stem thread is not only unable to be lubricated, but also directly subject to medium erosion, easy to damage.

Non Rising Stem Gate Valves Selection

Non rising stem gate valves can use wedge-shaped plugs or parallel plates. Plugs usually seal both the up and downstream sides of the valve while plates usually only seal on the upstream face. Wedges can take on a variety of design alternatives that reduce or accommodate wear of the sealing surfaces. Although the advantage of gate valves is their reduced head loss when open compared to globe valves, they are not useful for throttling and may not produce the positive shut-off that globe valves provide. Non rising stem gate valves are used in wastewater plants, power plants, and process plants for shut-off and for isolating service.

If you want to know more kinds of chemical valves, please visit our website.


Send product request

To: MSTN International Technologies Company
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES FULLY WELDED BALL VALVE MstnLand's series of fully welded ball valve chinacan be used to put through or shut off the flow of non-corrosive medium,...
HIGH TEMPERATURE AND HIGH PRESSURE NEEDLE VALVE
HIGH TEMPERATURE AND HIGH PRESSURE NEEDLE VALVE MstnLand's series of High temperature and high pressure needle Valve is mainly used in high temperature environment of fluid pressure regulation, p...
CHECK VALVES
CHECK VALVES As one of the butterfly check valve manufacturers, MstnLand provides high performance butterfly check, including Swing check valve, Lifting check v...
HIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES High pressure ball valve is a kind of ball valves which can operate at Class 800lb-Class 3500lb without the industrial valvebody getting damaged. I...
BRASS BALL VALVES
BRASS BALL VALVES Brass ball valves refer to ball valves made of brass material as the valve body and ball. Brass is the alloy that is made up of copper and zinc. It...
All supplier products

Same products

High-reliability Support ring Y10-4 for power station
"High-reliability Support ring Y10-4 for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "High-reliability Support ring Y10-4 for power station Deyang YOYIK have power plant professional...
Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant
"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant YOYIK professional productio...
High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation
High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Deya...
Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station
Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Is a m...
Class 1500 LB gate valve
Class 1500 LB gate valve Seller: Magpie Valve Packing Gasket Co., Ltd Product Name: Low-EmissionPacking Setfor Class 1500 LB API 6D Gate ValveModel: M600Size: ID 68 mm...