Low Dth Hammers
ANBIT Series DTH Hammer, a kind of valve-equipped Low-Air-Pressure hammer with a single piston, a plate valve and a central exhaust structure.The compressed air is adopted as the driving force. To prevent dust pollution and get a better performance, some high-pressure water may be added into the air for wet rock DTH drilling.
Product Description
Product featured :
The strong energy of single impact and the low energy consumption in rock crushing;2. The weight ratio of Piston and Bit almost Reaches 1:1 to provide long effective acting time, which leads to the improved efficiency in rock crushing and the extended service life of the drilling tool;3. A good performance in central air exhaust and cuttings discharge, which reduces the repeated crushing of rock;4. A check valve device is available to drill holes finder water.The ANBIT Series DTH Hammer, an ideal drilling tool, is widely used in such industries relating to energy, transportation,metallurgy,building etc.
Specification
|
Length |
870(mm) |
||
|
Connection Thread |
F48x10 PIN |
||
|
External Diameter |
82(mm) |
||
|
Weight |
24(KG) |
||
|
Hole Range |
90-120(mm) |
||
|
Working Pressure |
10-13(Bar) |
||
|
Air Consumption |
8-10 (m³ / min) |
||
|
dirll Tail rod |
CIR90 / M3 |
||
|
1、Connection |
ANBIT3-01 |
9、Reed spring |
ANBIT3-09 |
|
2、O type ring |
ANBIT3-02 |
10、Guide sleeve |
ANBIT3-10 |
|
3、top |
ANBIT3-03 |
11、"O"ring |
ANBIT3-11 |
|
4、check valve |
ANBIT3-04 |
12、front top sub |
ANBIT3-12 |
|
5、spring |
ANBIT3-05 |
13、stop ring |
ANBIT3-13 |
|
6、valve seat |
ANBIT3-06 |
12、front top sub |
ANBIT3-14 |
|
7、Cylinder |
ANBIT3-07 |
15、outer tube |
ANBIT3-15 |
|
8、piston |
ANBIT3-08 |
ABT Drilling Equipment Co., Ltd. mainly provides drilling rig equipmentto help you solve the problem of drilling at high efficiency and low cost.Always feel free to inquiry!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
|
|
Low Dth Hammers | ANBIT Series DTH Hammer, a kind of valve-equipped Low-Air-Pressure hammer with a single piston, a plate valve and a central exhaust structure.The c... |
 |
Automatic Mapping Water Detector PQWT-TC150 | PQWT-TC series automatic mapping water detector is based on the Earth's electromagnetic field as the field source, based on the difference in the c... |
 |
Eccentric Overburden Drilling Equipment | Eccentric drill bit is used for casing following drilling while drilling in soil layer. Eccentric Reamer System Operating Steps 1 At the beginning... |
 |
Thread Opener Bits | It is used in threaded drill pipe rig and enlarges the aperture on the basis of existing small holes. Specification Specification of Thread Opener... |
 |
Automatic Mapping Water Detector PQWT-TC500 | PQWTTC700series automatic mapping water detector is based on the Earth’s electromagnetic field as the field source, based on the difference ... |
Похожие товары
 |
Рулевая шаровая штифта заклепка машина | Продавец: Уханьская компания "Руйвэйт Машинери" | Rolling riveting machine ( closing in or flanging) is a kind of new equipment for rolling the edg... |
 |
Hole Opener Bit | Продавец: Anbit mechanical and Electrical Equipment Co., Ltd. | Hole Opener Drill Bit The following pipe bit is mainly used to drive iron pipe to drill together ... |
 |
Hand Hammer Drill | Продавец: Anbit mechanical and Electrical Equipment Co., Ltd. | The hand hammer drill machinehole diameter is 19 ~ 42mm, and the hole depth is up to 5m, usually ... |
 |
Hammer | Продавец: Anbit mechanical and Electrical Equipment Co., Ltd. | ABT supplies a series of DTH hammers for sale. All DTH hammer drills features high energy-efficie... |
 |
Eccentric Overburden Drilling Equipment | Продавец: Anbit mechanical and Electrical Equipment Co., Ltd. | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product Des... |
