Low Dth Hammers
ANBIT Series DTH Hammer, a kind of valve-equipped Low-Air-Pressure hammer with a single piston, a plate valve and a central exhaust structure.The compressed air is adopted as the driving force. To prevent dust pollution and get a better performance, some high-pressure water may be added into the air for wet rock DTH drilling.
Product Description
Product featured :
The strong energy of single impact and the low energy consumption in rock crushing;2. The weight ratio of Piston and Bit almost Reaches 1:1 to provide long effective acting time, which leads to the improved efficiency in rock crushing and the extended service life of the drilling tool;3. A good performance in central air exhaust and cuttings discharge, which reduces the repeated crushing of rock;4. A check valve device is available to drill holes finder water.The ANBIT Series DTH Hammer, an ideal drilling tool, is widely used in such industries relating to energy, transportation,metallurgy,building etc.
Specification
|
Length |
870(mm) |
||
|
Connection Thread |
F48x10 PIN |
||
|
External Diameter |
82(mm) |
||
|
Weight |
24(KG) |
||
|
Hole Range |
90-120(mm) |
||
|
Working Pressure |
10-13(Bar) |
||
|
Air Consumption |
8-10 (m³ / min) |
||
|
dirll Tail rod |
CIR90 / M3 |
||
|
1、Connection |
ANBIT3-01 |
9、Reed spring |
ANBIT3-09 |
|
2、O type ring |
ANBIT3-02 |
10、Guide sleeve |
ANBIT3-10 |
|
3、top |
ANBIT3-03 |
11、"O"ring |
ANBIT3-11 |
|
4、check valve |
ANBIT3-04 |
12、front top sub |
ANBIT3-12 |
|
5、spring |
ANBIT3-05 |
13、stop ring |
ANBIT3-13 |
|
6、valve seat |
ANBIT3-06 |
12、front top sub |
ANBIT3-14 |
|
7、Cylinder |
ANBIT3-07 |
15、outer tube |
ANBIT3-15 |
|
8、piston |
ANBIT3-08 |
ABT Drilling Equipment Co., Ltd. mainly provides drilling rig equipmentto help you solve the problem of drilling at high efficiency and low cost.Always feel free to inquiry!
在线联系供应商
Other supplier products
 |
UJ21 Drilling Jumbo | UJ21 tunneling trolley (underground jumbo drill) is widely used in underground mine development, small tunnelling, bolt hole and other reinforcemen... |
 |
Crusher | ABTcan provide dth hammer drilling. ABTalsoprovides a complete set of crushing production lines, including E-crusher, cone crusher, belt conveyor. ... |
 |
Drilling Bit | We have reverse circulation drill bitfor sale! DTH Drilling Bit Reverse Circulation Drill Bit High Pressure Drill Bit Low Pressure Drill Bit Hole... |
 |
NQL Series High Air Pressure DTH Hammers Without Foot Valve | ABT produces the highest quality and efficient DTH hammer and drill bits for the mining, construction, and water well industries. Drilling and blas... |
 |
Big Taps | Accidents occasionally occur during the construction of the submersible drilling, when the bit falls into the hole, which not only damages the tool... |
Same products
 |
转向球销铆接机，滚铆机 | 卖方: 武汉瑞威特机械有限公司 | Rolling riveting machine ( closing in or flanging) is a kind of new equipment for rolling the edg... |
 |
Hole Opener Bit | 卖方: Anbit mechanical and Electrical Equipment Co., Ltd. | Hole Opener Drill Bit The following pipe bit is mainly used to drive iron pipe to drill together ... |
 |
Hand Hammer Drill | 卖方: Anbit mechanical and Electrical Equipment Co., Ltd. | The hand hammer drill machinehole diameter is 19 ~ 42mm, and the hole depth is up to 5m, usually ... |
 |
Hammer | 卖方: Anbit mechanical and Electrical Equipment Co., Ltd. | ABT supplies a series of DTH hammers for sale. All DTH hammer drills features high energy-efficie... |
 |
Eccentric Overburden Drilling Equipment | 卖方: Anbit mechanical and Electrical Equipment Co., Ltd. | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product Des... |
