Chain Hooks
Chain Hooks
As one of chain hooks manufacturers, TITANSUHE has a huge range of chain hooks for Rigging and Tie Down. All our chain hooks are made of alloy steel with heat treatment for high strength and abrasion resistance that grade to 80 and 100, rated for overhead lifting applications. We also have grade 43 and Grade 70 chain hooks to help you build your lashing and tie down system. For different rigging purpose, we have sling hooks, grab hooks, self-locking hooks, foundry hooks, container hooks,lifting chain componentsetc for your choice. These hooks can come with eye type, clevis type or swivel type. Eye type chain hooks are designed for permanent attachment which have higher safety. Clevis type chain hooks are structured with a sturdy pin which can passes directly through the end link of chain. This greatly improve the assembly efficiency and save your rigging cost. Swivel hooks can rotate 360 degrees which provide easy access and attachment to the loads. You can find below chain hooks from us.
In Which Occasions, The Chain Hook Should Be Scrapped?
The hook shall be scrapped under any of the following conditions:
① Cracks by visual check;
② The wear of dangerous section reaches 10% of the original size;
③ Hook opening is 15% more than the original size;
④ The torsional deformation of hook body exceeds 10 °;
⑤ Plastic deformation of the dangerous section of the hook or the neck of the hook;
⑥ The hook thread is corroded;
⑦ Replace the bushing when the wear of the hook bushing reaches 50% of the original size;
⑧ When the wear of the disc hook mandrel reaches 5% of the original size, the mandrel shall be replaced.
Still not find the chain hooks you want, you can contact Titansuhelifting equipment factoryfor more custom solutions.
Dangerous Section of The Chain Hook
All the chain hooks have three dangerous sections, which should be paid special attention during inspection. As shown in the below schematic diagram, the three dangerous sections of the chain hook are:
(1) On the one hand, section A-A is affected by the tension of the sling, and the hook tends to be straightened; On the other hand, it is also affected by bending moment. Because the bending moment acting on this section is the largest and the bending stress is the largest, this section is a dangerous section.
(2) Section B-B is the same as section A-A. section B-B tends to be straightened and cut under the action of sling tension. The shear stress here is the largest, so it is also a dangerous section.
Schematic diagram of dangerous section
Schematic diagram of dangerous section
(3) C-C section, which is the thinnest part of the hook column, tends to be pulled off under the tension of the sling. The tensile stress here is the largest, so it is also a dangerous section.
Chain Hook Safe Use Tips
The lifting chainhook should be manufactured by a professional factory according to the technical conditions and Safety specifications of EN1677 or equivalence, and all the chain hooks should be tested and supplied with quality certificate. Otherwise it is not allowed to be used.
The new hook shall be subject to load test, and the opening of the measured hook mouth shall not exceed 0.25% of the original opening.
During use, the hook shall be checked frequently for cracks, serious deformation, corrosion and wear
The hook shall be tested once a year. During the test, conduct a 10min static test at 125% of the rated working load, and check with a MPI or other methods. There shall be no cracks, cracks and residual deformation.
The three dangerous sections shall be cleaned with kerosene and checked for cracks with a magnifying glass. Check the wear of bushing and pin for plate hook.
Defects on the hook shall not be repaired by welding
There are many lifting equipment manufacturersin China, but we are one of the best choices for you.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Load Binder | Load binder is an essential tension device to tight and secure load during transport. It is normally used together with binder chain to provide tie... | |
Bulk 1.5 Inch Ratchet Straps | Bulk 1.5 inch ratchet strapsrate from 1500kg, 2000kg up to 2500kg breaking strength. Working load is 1/3 of the breaking strength. Bulk 1.5 inch ra... | |
Thermal Shock Chamber | Thermal Shock Chamber Thermal shock chambers perform tailored environmental stress screening of component and board electronic assemblies. Thermal ... | |
CT620 2 Ton Hoist Trolley | Featured with quick installation and low headroom, TITANSUHE's GCT/GCL 620 series chain hoist dollyhas many advantages compared with a regular hois... | |
Crane Lifting Clamps | Crane lifting clamps, one of the lifting tools and equipment are specially designed for positioning, hoisting, and transferring steel sheets/struct... |
Похожие товары
Diesel Forklift Truck | Продавец: CHONGQING TITAN SUHE TECH CO., LTD | Diesel Forklift Truck Constructed with Hydraulic gearbox, electric reversing, semi-suspension se... | |
Chain Hooks | Продавец: CHONGQING TITAN SUHE TECH CO., LTD | Chain Hooks As one of chain hooks manufacturers, TITANSUHE has a huge range of chain hooks for R... | |
Metal Keychains | Продавец: kushan pinstar gift co.ltd | Pinstar has specialized in manufacturing custom made metal keyringsand enamel keychains for many ... | |
Acrylic Keychain | Продавец: kushan pinstar gift co.ltd | Wholesale personalized acrylic keychain from custom keychain factories and creator, Pinstar! A... | |
Rubber 3D Keyrings | Продавец: YC Metal Gift (Zhongshan) Limited., | Rubber 3D Keyrings PRODUCT DETAILS Rubber 3D Keyrings custom PVC Keychainlogo: as per your desig... |