ANSI/ASME B18.2.2 Square Nuts
ANSI/ASME B18.2.2 Square Nuts
ANSI/ASME B18.2.2 square flange nutcan be turned with a square wrench. One of the first quality fasteners, the square nut is regarded by many as an easy-to-use fastener that holds even the most difficult parts. The first version of the square nut was carved out of wood and used on threaded dowels. The square design makes the ANSI/ASME B18.2.2 square standard bolt and nuteasy to create a properly sized wrench or tool to tighten the nut into place.
ANSI/ASME B18.2.2 Square Thread Nut Specifications
Square Nut Bolt ASME B 18.2.2
ASME B 18.2.2 - 2015 Square Machine Screw Nuts (SAE J995 / ASTM F594 / F467)
ANSI/ASME B18.2.2 Square Nuts Dimensions
|
Legend |
Making |
|
P=pitch |
Carbon Steel:6,8,10,12 |
|
K=height of the nut |
Thread: |
|
D=the nominal diameter of the thread |
Surface:BLK,ZP,HDG,etc |
|
E=The length of the diagonal |
|
|
S=The length of the flat |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
ANSI / ASME B18.2.2 Flange Nuts | ANSI / ASME B182.2 PDFFlange Nuts The ANSI/ASME B18.2.2 flange bolts and nutsand the general hex nut are basically the same in size and thread spe... |
 |
EN 1661/14218 Flange Nuts | EN 1661/EN 14218hex flange nut is a nut with a wide flange at one end that acts as an integral washer. This serves to distribute the pressure of th... |
 |
DIN 1587 Acorn Nuts | DIN 1587 MetalAcorn Nuts DIN 1587 hex acorn nut introduction: DIN 1587 nutis a nut with a cap. Its function is to prevent foreign impurities an... |
 |
DIN 557/562 Square Nuts | Din 557 square nut/562 square nut is a steel fastening device screwed on a steel bolt-on on all four sides. The square nut uses a special wrench to... |
 |
DIN 975/ DIN 976 Threaded Rod | In terms of performance, the strength of DIN 975 DIN 976galvanized all-thread rods is relatively high, and their range of use is relatively high in... |
