Prototype Injection Mould

ISO Class 8 Clean Room



Quality Control



Low & High Volume Manufacturing



Competitive Price



Reliability and Stability

Prototype moulds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering team into the good design but also allow us to provide competitive prices and high-quality molds. Most of our prototypes mold customers are from Honda. Every design needs proofing before they are produced by mass molding production especially for the automotive parts.

We will also make personal solutions for prototypes mold just the same as production tooling. We share engineering information between our teams and our customers. Keeping close contact with our customers is one of the important factors that Packson has good performance in making tooling and molding. Therefore, we ensure that our communications between the engineering team and customers are always open and transparent.

Prototype Mold Details And Options

Packson moldbelievesthat it's important to test your market by first testing your product. Packson offers you an affordable method of testing with prototype parts. Our prototype processing helps you test your part design and make a small batch of parts for assembly testing. You may not very clear about the definition of prototype molds and the differences between prototype molds and injection molds. Here we can explain it for you:

	Prototype Mold	Production Mold
Objective	I need to prove my original design at Packson. I need the best solution for price and design before production and get parts quickly within 10-15 days	I have big volume production needs at Packson and need an open long-term running production mold.
			Best When	2. Key focus is to avoid design risk, increase R&D productivity and get parts into the market quickly for proving the utility of part.3.Typical Quantities<5,000 2. Consistency of part running is pivotal3. Mold schedule and processing documentation and qualification information is required
			Mold Cavities	Normally single cavity	Single and multi-cavities
			Mold Life	Limited (guaranteed for at least 2,000 shots-5,000 shots)	Unlimited
			Mold Storage	Upon customer's decision. Some will be destroyed once they confirm the design	Some will be shipped to the customer's molding company. Some will be left at Packson for long term running
			Quality Documentation	A basic inspection like tolerance control and finishing control	Full-spectrum inspection operating by CMM and all kinds of measuring equipment
Shared Features	Raw Material: Aluminum or SteelThe standard lead time of 15 days-30 daysConsultative Design Services like DFMProcessing by tool room equipment

Process For Prototype Mold

There are many things that need to be considered such as the product design needs to be perfect and it has to achieve actual full functionality before they get into the market. If there is any failure for your products which means the part design is not fulfilled yet and we need to keep improving the design and finding a better solution. Therefore, prototype mold is the best way for us to prove some issues before you are able to take your products into the market. Here is the process for prototype mold, you will find out what prototype mold exactly is:

There are 4 simple steps for prototype mold:

Start with a plastic part design

Initial concept or design is always the essential and critical part of manufacturing.No matter what kind of product you create like an electronic device or medical device, making the design and design should be the first step.

You should make sure of the feasibility and functionality when it comes to plastic product design. Moreover, you have to consider the concept is doable or not. If the design fails then it would waste time. But never mind, we have a professional engineer team who will make assessments for your design and provide our suggestions to help make the design better.

Providing DFM(Design for Manufacturing) and processing solution

We will make DFM according to your part design and offer a processing solution at a competitive price. Normally we will choose a removable insert which takes by hand during production, this will help cut some costs. But this is only used for small batch production within 500 shots. We will also analyze the thickness, angle draft, injection point, etc during these steps for making sure everything is ok before we start processing.

Mold creation or 3D printing

Simple 3D printing is fully sufficient for simple and small quantity plastic products. Therefore the expensive test mold is not neccessary.3D printing is a very simple process without much explanation. For another processing, the way is mold creation. This is the most important process in plastic prototyping. We will process the mold according to the tooling design and we will choose the steel which is softer and easier to carve out. This will help to make mold quickly with a short lead time. Rapid processing is one of the obvious features of the prototype mold. Because we don't need to make it like production mold as long as it can be operated and good for proving the customer's part design.

Making the prototype plastic molding parts by injection machine

For prototype mold, the plastic parts also need to be molded by a plastic injection machine. The mold will be placed into the injection molding machine and then injected with the plastic prototype material. Later material will be cooled by the water lines to allow it to create a shape on the cavity. After the cooling process, the mold will be opened when pressure from the clamp is released. Finally, the part will be ejected from the machine.

Applications of Prototype Mold

There are many applications for prototype molds like automotive, medical. These applications will keep increasing because of the development of new procedures. Here are some of them:

The making of molds – different grades of steel even plastic resin can be made through prototype mold.

The making of cores – SLS application is the latest technology used in sand casting shapes and cores.

The electrodes for EDM, making of marking stamps are some of the applications of prototype molds. Most of the applicated industry at Packson is automotive and medical.

There are many benefits for the prototype molds. With the features of low cost, quick lead time, and effective processing way, it will allow you to bring your parts into the market faster. The most important advantage is low-cost processing because it can make market testing with low volume production.

If you want to know more kinds of medical plastic parts, please visit our website.

Другие товары поставщика

	CNC Metal Machining Parts	Packson is a contract manufacturer specializing in nylonCNCMilling, CNC Turning, CNC Drilling services in China. We are able to manufacture plastic...
	Mold Components	We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days...
	Precision Injection Molding	Precision mold componentsis a process that requires high technique and the use of precision molds and precision machines. The process of precision ...
	2K Injection Molding	2k plastic injection mouldingis one type of injection mold. 2k two color moldingis also named as two shot molding, double shot mold, double-color m...
	Explore Packson's Injection Molding Services	ISO Class 8 Clean Room Quality Control Low & High Volume Manufacturing Competitive Price Reliability and Stability With more than 20 years exp...

Все товары поставщика

Похожие товары

	Электронная окулярная камера MECHANIC MEC 4K 2K HD для стереомикроскопа	Продавец: ШЭНЬЧЖЭНЬСКАЯ ТЕХНОЛОГИЯ PHONEFIX, LTD (КИТАЙСКИЙ PHONEFIX)	Описание Электронная окулярная камера Mechanic MEC 2K/2K PRO/4K HD может превратить бинокулярный ...
	Цифровой мультиметр Fluke 15B+ 17B+ 18B+, тестер напряжения и частоты	Продавец: Шэньчжэнь Weike Repair Technology Co., Ltd.	Полупрозрачная/полностью прозрачная/молочно-белая/светло-желтая паяльная паста iFixes 10CC， не со...
	HTT-02 Hot Tack Tester	Продавец: Cell Instruments Co., Ltd	The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
	SPC-01 Stretch Film Peeling Cling Tester	Продавец: Cell Instruments Co., Ltd	The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
	FTT-01 Film Thickness Tester	Продавец: Cell Instruments Co., Ltd	The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...