.

Prototype Injection Mould

ISO Class 8 Clean Room

Quality Control

Low & High Volume Manufacturing

Competitive Price

Reliability and Stability

Prototype moulds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering team into the good design but also allow us to provide competitive prices and high-quality molds. Most of our prototypes mold customers are from Honda. Every design needs proofing before they are produced by mass molding production especially for the automotive parts.

We will also make personal solutions for prototypes mold just the same as production tooling. We share engineering information between our teams and our customers. Keeping close contact with our customers is one of the important factors that Packson has good performance in making tooling and molding. Therefore, we ensure that our communications between the engineering team and customers are always open and transparent.

Prototype Mold Details And Options

Packson moldbelievesthat it's important to test your market by first testing your product. Packson offers you an affordable method of testing with prototype parts. Our prototype processing helps you test your part design and make a small batch of parts for assembly testing. You may not very clear about the definition of prototype molds and the differences between prototype molds and injection molds. Here we can explain it for you:

Prototype Mold

Production Mold

Objective

I need to prove my original design at Packson. I need the best solution for price and design before production and get parts quickly within 10-15 days

I have big volume production needs at Packson and need an open long-term running production mold.

Best When

  1. 2. Key focus is to avoid design risk, increase R&D productivity and get parts into the market quickly for proving the utility of part.3.Typical Quantities<5,000
  2. 2. Consistency of part running is pivotal3. Mold schedule and processing documentation and qualification information is required

Mold Cavities

Normally single cavity

Single and multi-cavities

Mold Life

Limited (guaranteed for at least 2,000 shots-5,000 shots)

Unlimited

Mold Storage

Upon customer's decision. Some will be destroyed once they confirm the design

Some will be shipped to the customer's molding company. Some will be left at Packson for long term running

Quality Documentation

A basic inspection like tolerance control and finishing control

Full-spectrum inspection operating by CMM and all kinds of measuring equipment

Shared Features

Raw Material: Aluminum or SteelThe standard lead time of 15 days-30 daysConsultative Design Services like DFMProcessing by tool room equipment

Process For Prototype Mold

There are many things that need to be considered such as the product design needs to be perfect and it has to achieve actual full functionality before they get into the market. If there is any failure for your products which means the part design is not fulfilled yet and we need to keep improving the design and finding a better solution. Therefore, prototype mold is the best way for us to prove some issues before you are able to take your products into the market. Here is the process for prototype mold, you will find out what prototype mold exactly is:

There are 4 simple steps for prototype mold:

Start with a plastic part design

Initial concept or design is always the essential and critical part of manufacturing.No matter what kind of product you create like an electronic device or medical device, making the design and design should be the first step.

You should make sure of the feasibility and functionality when it comes to plastic product design. Moreover, you have to consider the concept is doable or not. If the design fails then it would waste time. But never mind, we have a professional engineer team who will make assessments for your design and provide our suggestions to help make the design better.

Providing DFM(Design for Manufacturing) and processing solution

We will make DFM according to your part design and offer a processing solution at a competitive price. Normally we will choose a removable insert which takes by hand during production, this will help cut some costs. But this is only used for small batch production within 500 shots. We will also analyze the thickness, angle draft, injection point, etc during these steps for making sure everything is ok before we start processing.

Mold creation or 3D printing

Simple 3D printing is fully sufficient for simple and small quantity plastic products. Therefore the expensive test mold is not neccessary.3D printing is a very simple process without much explanation. For another processing, the way is mold creation. This is the most important process in plastic prototyping. We will process the mold according to the tooling design and we will choose the steel which is softer and easier to carve out. This will help to make mold quickly with a short lead time. Rapid processing is one of the obvious features of the prototype mold. Because we don't need to make it like production mold as long as it can be operated and good for proving the customer's part design.

Making the prototype plastic molding parts by injection machine

For prototype mold, the plastic parts also need to be molded by a plastic injection machine. The mold will be placed into the injection molding machine and then injected with the plastic prototype material. Later material will be cooled by the water lines to allow it to create a shape on the cavity. After the cooling process, the mold will be opened when pressure from the clamp is released. Finally, the part will be ejected from the machine.

Applications of Prototype Mold

There are many applications for prototype molds like automotive, medical. These applications will keep increasing because of the development of new procedures. Here are some of them:

The making of molds – different grades of steel even plastic resin can be made through prototype mold.

The making of cores – SLS application is the latest technology used in sand casting shapes and cores.

The electrodes for EDM, making of marking stamps are some of the applications of prototype molds. Most of the applicated industry at Packson is automotive and medical.

There are many benefits for the prototype molds. With the features of low cost, quick lead time, and effective processing way, it will allow you to bring your parts into the market faster. The most important advantage is low-cost processing because it can make market testing with low volume production.

If you want to know more kinds of medical plastic parts, please visit our website.



Send product request

To: Packson Mold Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Medical Plastic Injection Molding
Medical Plastic Injection Molding Packson is not totally the same as other medical plastic injection molding companies. Because we are an ISO-certified medical injection molding com...
Custom Contract Molding
Custom Contract Molding Plastic Injection Molds for Sale ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability ...
Multi-cavities Injection Molding
Multi-cavities Injection Molding Multi cavity mouldis an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold designis to produce m...
Medical Silicone Rubber Injection Molding
Medical Silicone Rubber Injection Molding ISO Class 8 Clean Room Quality Control Low & High Volume Manufacturing Competitive Price Reliability and Stability With more than 20 years of ...
Plastic Injection Molding
Plastic Injection Molding Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 se...
All supplier products

Same products

HTT-02 Hot Tack Tester
HTT-02 Hot Tack Tester Seller: Cell Instruments Co., Ltd The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
SPC-01 Stretch Film Peeling Cling Tester
SPC-01 Stretch Film Peeling Cling Tester Seller: Cell Instruments Co., Ltd The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
FTT-01 Film Thickness Tester
FTT-01 Film Thickness Tester Seller: Cell Instruments Co., Ltd The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
TST-01 Tensile Tester
TST-01 Tensile Tester Seller: Cell Instruments Co., Ltd TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
HST-01 Heat Seal Tester
HST-01 Heat Seal Tester Seller: Cell Instruments Co., Ltd HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...