Bare Board Test Probe CPM-2

• 

The bare board test probe is used for bare board (blank version) testing. To check the operation of a PCB circuit, the test probe is generally applied with the receptacle as the conduction confirmation and inspection of a circuit substrate to examine the fixture, analyze the completeness of the circuit, and inspect specification requirements of the circuit footprint, to ensure proper function of various circuits on PCBs.

Specification:

1. Recommended min. center: 2.54 (0.1")
2. Full travel: 4.2(0.165" ) / 2.54(0.1" )
3. Current rating:3A
4. Contact resistance:30mΩ
5. Spring force: 150g

Materials and finishes:

1. Plunger: Sk4 / PhBr / NI plated
2. Barrel: Brass , Gold plated
3. Spring: Stainless Steel

Другие товары поставщика

	Loaded Board Test Probe CPM-5	The loaded board test probe is applied for examining the loaded circuit boards. The common testing methods for loaded boards are ICT (In-Circuit Te...
	Semiconductor Test Probe CPM-011	CPM provides a series of semiconductor test probe products. Our products offer high-performance compliance, extremely low and stable DC resistance....
	Conductive Rubbers	Description It has greater electrical and thermal conductivity, heat and cold resistance than electrically conductive synthetic rubbers.
	Bare Board Test Probe CPM-0	The bare board test probe is used for bare board (blank version) testing. To check the operation of a PCB circuit, the test probe is generally appl...
	Loaded Board Test Probe CPM-4	The loaded board test probe is applied for examining the loaded circuit boards. The common testing methods for loaded boards are ICT (In-Circuit Te...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...