Bare Board Test Probe CPM-2

• 

The bare board test probe is used for bare board (blank version) testing. To check the operation of a PCB circuit, the test probe is generally applied with the receptacle as the conduction confirmation and inspection of a circuit substrate to examine the fixture, analyze the completeness of the circuit, and inspect specification requirements of the circuit footprint, to ensure proper function of various circuits on PCBs.

Specification:

1. Recommended min. center: 2.54 (0.1")
2. Full travel: 4.2(0.165" ) / 2.54(0.1" )
3. Current rating:3A
4. Contact resistance:30mΩ
5. Spring force: 150g

Materials and finishes:

1. Plunger: Sk4 / PhBr / NI plated
2. Barrel: Brass , Gold plated
3. Spring: Stainless Steel

Other supplier products

	Conductive Cloth	Conductive fabric is made by electroless plating method to composite the metal and fiber, which is a high added value fiber possesses the softness ...
	Loaded Board Test Probe CPM-5	The loaded board test probe is applied for examining the loaded circuit boards. The common testing methods for loaded boards are ICT (In-Circuit Te...
	Bare Board Test Probe CPM-0	The bare board test probe is used for bare board (blank version) testing. To check the operation of a PCB circuit, the test probe is generally appl...
	Semiconductor Test Probe CPM-021	CPM provides a series of semiconductor test probe products. Our products offer high-performance compliance, extremely low and stable DC resistance....
	Terminal Wire	Crimp terminals allow the wires to be easily connected to screw terminals, fast-on type terminals, wire splices and various types of combinations. ...

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...