Sponge foam collapsible hardness tester

• 

Purpose:

This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam （such as backrest, seat cushion foam, etc.）， and accurately measure the compression hardness of each foam part of the seat.

How it Works:

The sponge foam compression stress test puts the sample between the upper and lower pressure disks, and when the upper pressure disks compress the sample of A certain size down to the concave degree specified by the A method （B method, C method） required by the national standard at the specified speed, the load element on the load cell will feedback the induced pressure to the controller for processing and display, so as to measure the collapsibility hardness of the sponge, foam and other samples.

Functional characteristics：

1. Automatic zero clearing: After receiving the test start instruction, the system automatically clears zero.

2, automatic return: after the sample is broken, it will automatically return to the initial position.

3, change the speed: The machine can change the test speed arbitrarily according to different samples.

4, indicating value verification: the system can achieve the accurate calibration of force value.

5, control method: According to the test needs can choose the test force, test speed, displacement and other test methods.

Technical parameter：

1, control mode: touch screen control;

2, induction mode: precision load element;

3, capacity: 200kg;

4, unit switch: Kg, N, LB;

5, pressure plate: diameter 200mm, bottom rounded R1mm;

6, lower platform: 420×420mm, porosity diameter 6mm, spacing 20mm;

7, the maximum stroke: 75mm;

8, test speed: 100±20mm/min;

9, power source: servo motor;

10, transmission mode: precision ball screw;

11, power source: single-phase, 220V, 50Hz/60Hz, 2.5A;

12. Weight: 160kg.

Другие товары поставщика

	Bacterial Filtration Efficiency Tester	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Maeser Water Penetration Tester	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Smoke Toxicity Tester	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Shoes Sole Bending Resist Testing Machine	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Stripping force pulling machine	Product use: Universal material testing machine/Tensile strength tester/Peeling strength tester is a professional electronic universal material te...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...