Sponge foam collapsible hardness tester

Purpose:

This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam （such as backrest, seat cushion foam, etc.）， and accurately measure the compression hardness of each foam part of the seat.

How it Works:

The sponge foam compression stress test puts the sample between the upper and lower pressure disks, and when the upper pressure disks compress the sample of A certain size down to the concave degree specified by the A method （B method, C method） required by the national standard at the specified speed, the load element on the load cell will feedback the induced pressure to the controller for processing and display, so as to measure the collapsibility hardness of the sponge, foam and other samples.

Functional characteristics：

1. Automatic zero clearing: After receiving the test start instruction, the system automatically clears zero.

2, automatic return: after the sample is broken, it will automatically return to the initial position.

3, change the speed: The machine can change the test speed arbitrarily according to different samples.

4, indicating value verification: the system can achieve the accurate calibration of force value.

5, control method: According to the test needs can choose the test force, test speed, displacement and other test methods.

Technical parameter：

1, control mode: touch screen control;

2, induction mode: precision load element;

3, capacity: 200kg;

4, unit switch: Kg, N, LB;

5, pressure plate: diameter 200mm, bottom rounded R1mm;

6, lower platform: 420×420mm, porosity diameter 6mm, spacing 20mm;

7, the maximum stroke: 75mm;

8, test speed: 100±20mm/min;

9, power source: servo motor;

10, transmission mode: precision ball screw;

11, power source: single-phase, 220V, 50Hz/60Hz, 2.5A;

12. Weight: 160kg.

Other supplier products

	Los Angeles Abrasion Tester (JTG E42)	Applicable standards: JTG 3432-2024 "Aggregate Test Regulations for Highway Engineering" : The T0317-2005 Los Angeles method for coarse aggregate ...
	Scorch Sublimation Tester	Scorch/Sublimation Tester Testing Standards: ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850 Ap...
	Fiber thermal shrinkage tester	Intelligent fiber heat shrinkable tester used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, b...
	Automatic torch guard	Product advantages： Anti-splash,High tempera,Oil repellent,Durable; Design advantage: Digital remote design,No need for field measurement,Short ...
	Mask Fit Tester	The mask fit tester is a key device to ensure the protective effectiveness of masks. Working principle: Based on aerodynamics and particle monito...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...