Water injection counterweight dummy
This counterweight dummy can be filled with water, the torso and the bottom are separated,
independently filled with water or solid filler, and can be adjusted to the Angle of the backrest to
fit the seat, child seat and other operating tests of the car.
Part series
1. Trunk
2. Base part
3. Bottom shaft fixing screw
4. Quality marking
5. Sensor applications
6. Install and fix the accessories
7. Accessories are installed and fixed
Mass distribution
1. Bottom: empty weight 10kg, loading: 38kg
2. Trunk: empty weight 4kg, load: 39kg
Renault special - German quality
The body part is designed with a seat belt fixed point;
Natural colors can be filled with water, sand, or other solid materials.
Product displays can be used in cars and playground facilities （with large filler ports）
And can be used in simulated weight and body type tests, including vehicle carrying, braking,
acceleration, tire traction, safety lacing, seat wear, and accident replay experiments.
Advantages
Light weight, easy to handle;
The maximum 17G acceleration has been tested;
Reusable;
Suitable for standard motor vehicle seats;
Designed with grooves for fastening seatbelts.
Product features
Water two scales can choose the weight;
Equipped with 2" filler port and plug head, and 1 "drain port, can be customized specific
drain/valve lifting ring port is available.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Computer-controlled Helmet Impact Tester | Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ... |
 |
Sock wear tester | Product Introduction: Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfor... |
 |
Gurley Stiffness Tester STD-AG84 | Application The Gurley Stiffness Testeris based on the Gurley Softness Tester test method. It applies a certain mechanical external force to the s... |
 |
Enamel Boiling Water Mass Loss Tester | Product Introduction: The enamel layer boiling water weight loss tester is designed according to QB/T 2590-2003 Appendix A, GBT99892-2015 /ISO 287... |
 |
American European bending test meter | Test Purpose： To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose choking or i... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
