Catheter bending resistance tester
Product introduction
The tester is composed of a programmable controller, a touch screen, a force sensor,
a transmission device, an airborne printer, etc. It provides a menu display in both Chinese
and English, and has a test mode for automatic operation of various parameters set by
man-machine dialogue. Test control range includes: nominal capacity, core rod displacement,
print setting, test, up, down, time, calibration, verification and other function Settings. With
the on-board printed test, the test load and sliding data （starting force, average force,
maximum thrust） can be displayed in real time. Automatically judge the test results, start
the automatic buzzer alarm if unqualified, and print out the test data and results by the printer
for analysis.
Test principle
The loop circumference of the catheter is expressed as the bending length, and the flow
rate of the catheter drainage cavity and the irrigation cavity is measured under the bending
length, so as to reduce the initial flow rate of the corresponding cavity after the flat catheter
is placed by 50%.
Meet the standard
YY/T 0325-2016, GB/T 15812.1-2005
Technical parameter
1. Static level height: 1000±5mm, automatic circulation of water pump （adjustable
static water surface）
2. Time controller: 0-- 60min, error is not more than ±1S
3. Fixture: suitable for various catheters
4. Flow calculation: measuring cylinder method
5. Flow rate: >500ML/MIN
6. Overall size: 400×290×240（mm）
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Building Combustion Performance Testing machine | Introduction Building combustion performance tester is mainly used to test the fire resistance of building materials and their components. It&rsqu... |
 |
Catheter Guidewire Friction Tester | Product introduction The guide wire friction tester is mainly used to measure the friction between the guide wire and the guide wire. This device ... |
 |
Flip Phone Durability Tester | Product Introduction: Mobile clamshell testing machine is a special equipment for mobile clamshell fatigue test. Its structure design is reason... |
 |
Carpet Dynamic Load Tester | Compliance Standards ISO 2094: 1999 (BS) QB/T 1091-2001 ASTM D3574 TEST I4 Instrument Features Provide information on the reduction in the thi... |
 |
Mattress Durability Fatigue Tester | Product Description Mattress durability testing machine. This test is mainly used to evaluate the resistance to fatigue pressure and surface wear ... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
