Catheter bending resistance tester
Product introduction
The tester is composed of a programmable controller, a touch screen, a force sensor,
a transmission device, an airborne printer, etc. It provides a menu display in both Chinese
and English, and has a test mode for automatic operation of various parameters set by
man-machine dialogue. Test control range includes: nominal capacity, core rod displacement,
print setting, test, up, down, time, calibration, verification and other function Settings. With
the on-board printed test, the test load and sliding data （starting force, average force,
maximum thrust） can be displayed in real time. Automatically judge the test results, start
the automatic buzzer alarm if unqualified, and print out the test data and results by the printer
for analysis.
Test principle
The loop circumference of the catheter is expressed as the bending length, and the flow
rate of the catheter drainage cavity and the irrigation cavity is measured under the bending
length, so as to reduce the initial flow rate of the corresponding cavity after the flat catheter
is placed by 50%.
Meet the standard
YY/T 0325-2016, GB/T 15812.1-2005
Technical parameter
1. Static level height: 1000±5mm, automatic circulation of water pump （adjustable
static water surface）
2. Time controller: 0-- 60min, error is not more than ±1S
3. Fixture: suitable for various catheters
4. Flow calculation: measuring cylinder method
5. Flow rate: >500ML/MIN
6. Overall size: 400×290×240（mm）
Send product request
Other supplier products
 |
Microcomputer - controlled Four - ball Friction Testing Machine | Applicable Standards： When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the followin... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under cont... |
 |
Aerosol Foams Flammability Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi... |
 |
Single wire and cable vertical combustion tester | Main use G233 Fabric vertical combustion tester is mainly used to evaluate the combustion characteristics of plastics and other non-metallic mater... |
 |
Circuit Integrity Under Fire Conditions Apparatus BS 6387 | Standard BS 6387 Feature Control cabinet parameters: 1.With double flow meters and pressure regulators. 2.Automatic control of the testing pro... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
