Collection of needle rubber sleeve resilience tester

Product introduction

　　The collection needle rubber sleeve resilience tester evaluates the force measured by the

collection tube when it passes vertically through a die hole larger than 0.05 mm outside

diameter of the collection needle tube under test.

Meet the standard

　　YYT1618-2018 "Disposable Human Venous Blood Sample Collection Needle"

Technical parameter

　　1. Pressure test range: 0 — 50N, error is not more than ±1%, resolution 0.01N.

　　2. Test time: 1-999S, any choice, the error is not more than ±0.5S.

　　3. Test speed: 50mm/min, 80mm/min, 100mm/min error is not more than ±2%.

　　4. Printing method: Each time can print 8, 10 test data or 13 test data and the average

piercing force and deviation value.

　　5. Measuring distance: 0 — 50mm, error is not more than ±0.1mm.

Operation method

　　1. Insert the needle at the butt end into the die hole of the clamping fixture 2mm above

the surface.

　　2. Start the test device to compress the rubber sleeve.

　　3. Measure the rubber sleeve resilience at 5mm and 15mm between the needle tube and

the needle base.

　　4. The test result is 0.5N≤ the rubber sleeve resilience ≤1.5N.

Другие товары поставщика

	BBA steady state solar simulator tester	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo...
	Gas Hazardous Characteristics Tester	This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mix...
	Solids Spontaneously Igniting Tester	Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.3.1.4 Test N.2: Test ...
	Air - tightness Testing Device for Automotive Connectors	The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containers...
	Catheter Leakage and Compliance Tester	Standards YY/T, etc. Main Uses The catheter leakage and compliance tester is mainly used to detect the leakage and compliance of medical catheters ...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...