Dry and Wet Retroreflection Measuring Instrument (for Dry and Wet Retroreflectometer)

Standards

EN ISO 20471:2013

ANSI/ISEA 107-2015

GB 20653-2006

GB/T 18833

Main uses

Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of materials in dry and wet sand abrasive environment. By simulating the wear environment of dry sand or wet sand in actual working conditions, the testing machine can quantitatively test the wear resistance of different materials. This kind of equipment has a wide range of application value in material research and development, product quality control, industrial production and other fields.

Specifically, the main uses of dry and wet sand abrasive wear testing machines include:

Material research and development; In the development process of new materials, wear-resistant parts are an important performance index. Dry and wet abrasive wear testing machines can help developers quickly and accurately evaluate the wear resistance of new materials, thereby guiding the optimal design of materials.

Industrial production: In industrial production, many parts need to have good wear resistance to ensure product stability and service life. By using dry and wet sand abrasive wear testing machines to test parts, it can help enterprises screen out materials and processes with good wear resistance, thereby improving product quality.

Quality control: Dry and wet abrasive wear testing machines are also widely used in product quality control. Through the wear resistance test of the products produced, the unqualified products can be found and treated in time to ensure that the products flowing to the market have good resistance.

Support Services

1 English Manual

2 Certificate of Quality

3 Remote Online Support

4 Breakdown Support

5 Applications Support

6 12 months warranty

7 CE, ISO 17025 Certificate

8 7 * 24 Service

9 Spare Parts

10 Training

11 Installation

Applicable standards

Dry and wet abrasive wear testing machines usually need to follow certain standards and specifications when testing. Here are some common applicable standards:

ASTM Standards: Standards developed by the American Society for Materials and Testing (ASTM) include content related to dry and wet abrasive wear testing. For example, the ASTM G65 standard may specify specific methods and requirements for abrasive wear tests of dry-sand rubber wheels; The ASTM G105 standard may specify specific requirements for abrasion test methods for wet sand rubber and rubber wheels. These standards specify parameters and requirements such as loading methods, abrasive types, test cycles, and data recording during the test process.

B Ash standard: China's machinery industry standard (B Ash) may also contain content related to dry and wet abrasive wear tests. For example, the JB/ 7705 standard specifies the rubber wheel method in the wear test method for loose abrasive particles, which can be used to evaluate the wear resistance of materials in dry sand environments. In addition, JB/T 9396 and other standards may specify the size of the sample, fixture design and other specific requirements.

When conducting dry and wet sand abrasive wear tests, it should be ensured that the selected standards are consistent with the test purposes and requirements, and the test methods and steps specified in the standards are strictly operated. At the same time, it is also necessary to pay attention to the calibration and maintenance of the testing machine to ensure the accuracy and reliability of the test results.

Specifications

Light resource：Standard Light A, color temperature 2856K

Illuminometer: 0.01lux~200klux (Equipped with machine)Optical

detectorAngular aperture: δく12′

observation angle a：12′ ~2° adjustable,accuracy:6′

angle of incidence β：0° ~40° adjustable,accuracy:1°

Sample holder：Available to accurate locate between first spindle β 1 and

Sample holder second spindle β2

Thedistancefromopticaldetector to specimen surface：15m (need 15 darkroom); Configure thelaser rangefinder

Nozzle diameter：1.19mm, to produce a conical and steadywater column for water pipe

Nozzle distance to specimen：1000mm

Sample holder device：Specimen size: 150*150mmor 50*50mm

Spray water speed：284mm/h

Time control：0-99.99min, accuracy:0.01min

Другие товары поставщика

	NFPA 701-1 Flammability Tester	Introduction This tester mainly based on NFPA 701 R & D and the United States NFPA 701 that provides fabric and film flame propagation test me...
	Rupture strength tester	Product introduction 　　Carton blasting machine is an international universal MULLEN （MULLEN） type instrument, mainly used to determine a variet...
	Bottle Wall and Bottom Thickness Tester	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pharmaceutical, food, cosmetics, and other industries...
	Building Material Noxious Gas Analysis Apparatus	Introduction Thisdevice is designed accordance to DIN53436AND .it realized smoke of burning material continuous and stable production and gas extr...
	Fabric textile 45 degree flammability tester	Applications: 45 degree flammability testeris designed to determine the burning characteristics of textiles. Stainless steel test cabinet with gla...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...