.

Battery short-circuit tester

Product introduction

  The device is designed based on a variety of battery short-circuit test standards.

According to the standard requirements, the short-circuit device must meet the

internal resistance range of 80 soil 20m, so as to obtain the maximum short-circuit

current required by the test. In addition, the circuit design of the short-circuit device

must also be able to withstand the impact of large current, so we choose industrial

grade DC electromagnetic contactors and all copper terminals and internal copper

plates to guide the flow, wide and thick copper plates effectively improve the heat

dissipation effect, make the high-current short-circuit device safer, effectively reduce

the loss of test equipment, and ensure the accuracy of the test data.

Meet the standard

  GB/T31485-2015 "Safety requirements and test methods for power batteries for

electric vehicles"

  GB/T31241-2022 "Safety requirements for Lithium-ion batteries and battery packs

for portable electronic products"

  UN38.3 United Nations Manual of Tests and Standards for the Transport of

Dangerous Goods

  IEC62133 "Safety requirements for batteries (groups) composed of cells and for

use in portable equipment"

  UL1642:2012 "Lithium Battery Standard"

Technical parameter

  Inner box size :400x400x400mm(width x depth x height)

  Size :760x690x1720mm(width x Depth x height)

  Temperature range :RT+10-150℃C

  Temperature display accuracy :0.1°C

  Temperature stability: 1.0*C

  Temperature uniformity: 2 "C

  Heating time :(5±2) "C/min

  Inner box material :SUS304 stainless steel plate, thickness 1.2mm;

  Outer box material: 1.5mm thick cold rolled steel plate paint treatment;

  Observation window: 250x250mm tempered glass, with stainless steel mesh;

  Lighting device: The machine is equipped with a light, which is convenient to

observe the state of the tested sample;

  Door: single door open left, side of the door is equipped with explosion-proof

chain;

  Test hole: There are 2 test holes with a diameter of 50mm on the right side of

the equipment, which is convenient to put the temperature, voltage, current and

other collection lines:

  Insulation material: high efficiency compressed glass wool

  Heat preservation device: no fuse switch, over temperature protection switch, fuse

  Safety device: equipment equipped with overtemperature alarm;

  Control formation: reach the set time to cut off the heating power supply;

  Air supply circulation system: convection air supply circulation system

  Control mode: touch screen control

  Temperature collection range :RT-1000°C;

  Temperature acquisition channel :1 channel;

  Temperature acquisition accuracy: 1.5°C;

  Voltage acquisition model :0-100V;

  Voltage acquisition channel :1 channel;

  Voltage accuracy: Earth 0.5%FS;

  Current collection range :0-1000A;

  Current acquisition channel :1 channel;

  Current accuracy: soil 0.5%FS;

  Acquisition frequency :10HZ

  Internal resistance of device loop :80 20mΩ;

  Port pressure port: The opening size is 200x200mm, located at the back of the box.

When the sample explodes, the pressure relief port will pop open and remove the

pressure;

  Device movement: there are four universal casters at the bottom of the device,

which can move freely;

  Equipment weight :170Kg;

  Power supply :AC220V;

  Power :3KW.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Toy flammability tester
Toy flammability tester TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
Temperature and Humidity Alternating Test Chamber for Automotive Wires
Temperature and Humidity Alternating Test Chamber for Automotive Wires The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wires....
G238BB Electronic Crockmeter
G238BB Electronic Crockmeter TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
Steam jet test chamber
Steam jet test chamber Technical parameters: All parts of the steam jet test chamber in contact with the medium are rust-proof and can be operated with deionized water. ...
Fabric Bursting Strength Tester
Fabric Bursting Strength Tester TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
Все товары поставщика

Похожие товары

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Продавец: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A Продавец: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Продавец: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Продавец: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Продавец: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...