Dry and wet state reverse reflection coefficient tester

• 

Product Introduction:

Dry and wet state reverse reflection coefficient tester is used to simulate the evaluation of the reflective performance of occupational high-visibility warning materials in dry state and wet state, and to determine the reverse reflection coefficient of the sample surface. It is suitable for visible warning clothing worn by various posts to ensure the safety warning of personnel.

Technical indicators:

1, the hard plastic cover is equipped with a movable door, the cover has a square hole, the side length is 150mm;

2, the nozzle diameter is 1.19mm, the water supply pipe produces a conical stable and uniform water column;

3, nozzle distance sample 1000mm;

4, when the water column contacts the sample, it forms a （10±5） degree Angle with the surface of the sample in the vertical direction;

5, sample rack device, sample size: 150mm×150mm;

6, water spraying speed: 284mm/h;

7, time control: 0-99.99min, accuracy: 0.01min;

8, light source: standard light source A, color temperature is 2856K;

9, light detector: illuminance meter 0.01lx —— 200klx, aperture Angle δ<12 ';

10, observation Angle α : 12 '—— 2° adjustable, accuracy: 6';

11, incidence Angle β : 0° —— 40° adjustable, accuracy: 1°;

12, sample frame: can be accurately positioned in the first axis β1 and the second axis β2 orientation;

13, the light detector distance from the sample surface: 15m.

Applicable standards:

GB/T 20653-2020 "Protective Clothing Occupational High visibility Warning clothing" Appendix C Appendix E

GB/T 33536-2017 Protective clothing Forest fire protection clothing

GB/T 38046-2019 Reflective vest for car occupants

Другие товары поставщика

	Full Face Masks Flame Resistance Test Machine	Introduction Fireman fire-protective clothing is mainly composed of jacket and bibcomposition,may also wear fire protective helmets, fire protecti...
	Burning Behaviour of Bunched Cables EN 50399	This Tester is designed accordance with the relevant provisions of UL1685.GB18380.3 standard about wire and cable burning test requirements. And me...
	Sliding Bearing Fatigue meter	Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re...
	Leather flexural tester	Standards EN ISO 20344:6.6: Safety footwear leather flexing resistance. I.U.P.10+20/I.U.P.20: International Union of Leather Technologists prot...
	Large scale Calorimeter	Product details According to the heat release rate, calorie is divided into several types. The most common calorimeters include a cone calorimeter...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...