Dry and wet state reverse reflection coefficient tester
Product Introduction:
Dry and wet state reverse reflection coefficient tester is used to simulate the evaluation of the reflective performance of occupational high-visibility warning materials in dry state and wet state, and to determine the reverse reflection coefficient of the sample surface. It is suitable for visible warning clothing worn by various posts to ensure the safety warning of personnel.
Technical indicators:
1, the hard plastic cover is equipped with a movable door, the cover has a square hole, the side length is 150mm;
2, the nozzle diameter is 1.19mm, the water supply pipe produces a conical stable and uniform water column;
3, nozzle distance sample 1000mm;
4, when the water column contacts the sample, it forms a （10±5） degree Angle with the surface of the sample in the vertical direction;
5, sample rack device, sample size: 150mm×150mm;
6, water spraying speed: 284mm/h;
7, time control: 0-99.99min, accuracy: 0.01min;
8, light source: standard light source A, color temperature is 2856K;
9, light detector: illuminance meter 0.01lx —— 200klx, aperture Angle δ<12 ';
10, observation Angle α : 12 '—— 2° adjustable, accuracy: 6';
11, incidence Angle β : 0° —— 40° adjustable, accuracy: 1°;
12, sample frame: can be accurately positioned in the first axis β1 and the second axis β2 orientation;
13, the light detector distance from the sample surface: 15m.
Applicable standards:
GB/T 20653-2020 "Protective Clothing Occupational High visibility Warning clothing" Appendix C Appendix E
GB/T 33536-2017 Protective clothing Forest fire protection clothing
GB/T 38046-2019 Reflective vest for car occupants
在线联系供应商
Other supplier products
 |
Cut Susceptibility Tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules and... |
 |
Seal Strip Abrasion Tester | Seal Strip Abrasion Tester is designed to determine the resistance of car seal strip to abrasion. Test specimens are repeatedly rubbed against spec... |
 |
Fully Automatic Continuous Flow Reaction Calorimeter | Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it can quickly obtain the reaction heat release a... |
 |
Rubber hose outer coating wear testing machine | Product Introduction: Rubber hose outer coating Wear testing machine for hydraulic hoses and other similar types of hoses with fabric or steel wir... |
 |
Bubble Pressure Method Membrane Pore Size Analyzer | Test function ◆ Bubble Point Pressure ◆ Wet Membrane Flow-Pressure Curve (Wet Curve) ◆ Bubble Point Pore Size (Maximum Pore Size) ◆ Dry Membran... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
