Fiber ratio resistance tester
Product Introduction:
It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the specific resistance value of the fiber according to the filling degree of the fiber
Applicable standards:
GB/T 14342-1993 "Synthetic short fiber specific resistance test method"
Technical parameters:
1, fiber specific resistance measurement range :10^6Q——10^13Q
2, test sample weight :15g
3, the measurement voltage is 50V, 100V, the deviation is less than 5%
4, working environment temperature :20℃ —— 2℃， humidity :65% —— 10%RH
5, the instrument in a stable operating voltage and no signal input between 1- 8 hours of zero drift less than 4% soil
6, the basic error of the instrument to the standard resistance measurement :≤ soil 20%
7. Power supply :AC220V
8, overall size :450x265x133mm（LxWXH）
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
AC/DC High - Voltage Testing Machine for Automotive Wires | Standards ISO 6722, ISO 14572: International standards for automotive cables and electrical continuity. IEC 60529: IP code compliance for dust/... |
 |
Rubber Mooney viscometer | Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa... |
 |
Micro Rapid Closed Cup Flash Point Tester(Pensky Martens) | Reference Standards： SN/T 3077.1、SN/T 3077.2. SH/T 0768. DL/T 1354. ASTM D93、ASTM D6450、ASTM D3828、ASTM D7094、ASTM D7236、ASTM D56、ASTM D56、ASTM... |
 |
Carton drop tester | Product introduction It is mainly used to simulate the impact of the drop impact on the packaging during transportation and loading and unloa... |
 |
Fully Automatic Stripping Machine for Automotive Wires | The fully automatic stripping machine for automotive wires complies with the standards of GB/T2951 - 2008 and IEC60811 *General Test Methods for In... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
