Rupture strength tester
Standard
- IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing
- UL 61730: Safety Standard for Photovoltaic Modules
- CE Certification(Conformité Européenne)
Product Advantages
- Ultra-Wide Pressure Range
- 250–5,600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.
- 0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.
- Precision Engineering
- 5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.
- Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.
- Safety First
- Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5,600 kPa.
- Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.
- User-Centric Design
- 7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.
- Voice-Guided Setup: Step-by-step audio prompts for operators.
- Data Integrity
- Built-In Printer: Generates ISO 17025-compliant test certificates on-site.
- SD Card Logging: Exports pressure-time curves for R&D analysis.
Product Features
- Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.
- Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.
- Self-Calibrating System: Auto-tare and linearity checks before each test.
- Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.
- Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.
Technical Parameters
| Parameter | Specification |
|---|---|
| Pressure Range | 250–5,600 kPa (36–812 psi) |
| Resolution | 0.01 kg/cm² (1.42 psi) |
| Holding Pressure | 5 kg/cm² (71 psi) adjustable |
| Air Source | 6 kg/cm² (87 psi) min (customer-provided) |
| Control Accuracy | ±1% FS (full scale) |
| Power Supply | 220V AC, 50/60Hz (single-phase) |
| Dimensions | 560mm (W) × 470mm (D) × 550mm (H) |
| Weight | 60 kg (net) |
Accessories Included
- Testing Kit:
- 1x Specialized Clamping Fixture (for 2–20 mm modules).
- 2x High-Temperature Rubber Membranes (300°C rated).
- 5x Aluminum Foil Calibration Discs.
- Consumables:
- 1x 85% Glycerin Solution Bottle (for hydraulic calibration).
- 10x Disposable Dust Filters.
- Documentation:
- Multilingual Quick-Start Guide (printed + digital).
- Compliance Certificates for IEC/UL Standards.
- Safety Gear:
- 2x Safety Goggles (ANSI Z87.1 rated).
- 1x Emergency Pressure Release Key.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Automotive Connector SO₂/H₂S Corrosion Test Chamber | Standards: GB/T 10587-89, GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosion testing. GJB 150: China’s military-grad... | |
| Sliding Bearing Fatigue Testing Machine | Material Research and Development During the research and development of new materials, this testing machine can be used to evaluate the fatigue p... | |
| Negative Pressure Blood Tube Capacity Tester | The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows: Complia... | |
| Bio-absorbable Internal Fixation Plates Tester | Standard YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axia... | |
| fogging test equipment | Working Principle: The main frame of theFogging Testerincludes a water sink fully filled with specified ethylene glycol, which can reach a high te... |
Похожие товары
| Full-Body Garment Stress Tester,FZ/T 70015 | Продавец: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... | |
| Industrial Dry Cleaning Machine,industrial garment steamer | Продавец: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... | |
| MST Medical Compression Stocking Tester,compression sock tester | Продавец: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... | |
| MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Продавец: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... | |
| Dental material color stability tester | Продавец: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
















