.

Wet leakage current test system of photovoltaic module

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • UL 61730: Safety Standard for Photovoltaic Modules
  • ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories
  • CE Certification(Conformité Européenne)

Product Advantages

  1. IEC 61215 Compliance
    • 22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.
    • <3,500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.
  2. Multi-Directional Spray Simulation
    • 360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.
    • Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.
  3. Corrosion-Resistant Design
    • 15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.
    • 316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.
  4. Safety First
    • Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.
    • Door Interlock System: Halts testing if enclosure is opened during wet cycles.
  5. Smart Data Acquisition
    • 16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.
    • AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.

Product Features

  • Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.
  • 7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.
  • Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.
  • Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.
  • Modular Design: Expandable from single-module to 10-module parallel testing.

Technical Parameters

ParameterSpecification
Test Tank Dimensions 2,100mm (W) × 1,000mm (D) × 250mm (H)
Tank Material 15mm Cast Acrylic (Plexiglass)
Temperature Range 15°C to 40°C (operational)
Temperature Stability ±0.5°C (at 22°C setpoint)
Liquid Resistivity <3,500 Ω·cm (deionized water recommended)
Spray Pressure 0–10 bar (adjustable)
Flow Rate 0–15 L/min (per nozzle)
Power Supply 230V AC, 50/60Hz (single-phase)
Dimensions 2,500mm (W) × 1,200mm (D) × 1,500mm (H)
Weight 350 kg (net) / 450 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x PV module test fixtures (adjustable for frameless/framed modules).
    • 10x insulated test leads with alligator clips.
  2. Software Suite:
    • License key forLeakTest Pro(Windows/Linux).
    • 1-year free access to cloud-based I-V curve analyzer.
  3. Calibration & Safety:
    • NIST-traceable conductivity meter.
    • Emergency eyewash station (wall-mounted).
  4. Maintenance Kit:
    • Spare acrylic tank seal and nozzle gaskets.
    • Tank cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.

Отправить запрос, связаться с поставщиком

Кому: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Helmet Anti - detachment Testing Machine
Helmet Anti - detachment Testing Machine Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh...
Shoe Peel Tester
Shoe Peel Tester Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p...
BBA steady state solar simulator tester
BBA steady state solar simulator tester Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo...
Fiber impurity Tester ITMF
Fiber impurity Tester ITMF Standards: ITMF Applications: It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, ...
PV Backsheet Abrasion Tester/Coating scratch tester for solar panels/ Solar panel backsheet scratch hardness tester
PV Backsheet Abrasion Tester/Coating scratch tester for solar panels/ Solar panel backsheet scratch hardness tester Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a...
Все товары поставщика

Похожие товары

KL‑016A Benchtop High‑precision pH Meter
KL‑016A Benchtop High‑precision pH Meter Продавец: Келийлонг Электронные Акционерные Компании Product Description: Large‑screen display with high resolution and precision for con...
Large Naïve VHH Library
Large Naïve VHH Library Продавец: AlpVHHs Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o...
pH-2398  pH/EC/ORP/Temperature  multi-parameter Water Quality Tester
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester Продавец: Коллирон электроникс лимитед Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
ORP-2026S  Waterproof Soil ORP and Temperature Meter
ORP-2026S Waterproof Soil ORP and Temperature Meter Продавец: Коллирон электроникс лимитед 范围 ORP -999~999mV Temp 0~50℃ 分辨率 ORP 1mV...
TDS-2616  Waterproof EC/TDS/Temperature Meter
TDS-2616 Waterproof EC/TDS/Temperature Meter Продавец: Коллирон электроникс лимитед Range EC ~19.9mS TDS Temp 0~50℃ R...