Wet leakage current test system of photovoltaic module
Standard
- IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
- UL 61730: Safety Standard for Photovoltaic Modules
- ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories
- CE Certification(Conformité Européenne)
Product Advantages
- IEC 61215 Compliance
- 22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.
- <3,500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.
- Multi-Directional Spray Simulation
- 360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.
- Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.
- Corrosion-Resistant Design
- 15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.
- 316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.
- Safety First
- Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.
- Door Interlock System: Halts testing if enclosure is opened during wet cycles.
- Smart Data Acquisition
- 16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.
- AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.
Product Features
- Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.
- 7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.
- Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.
- Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.
- Modular Design: Expandable from single-module to 10-module parallel testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Tank Dimensions | 2,100mm (W) × 1,000mm (D) × 250mm (H) |
| Tank Material | 15mm Cast Acrylic (Plexiglass) |
| Temperature Range | 15°C to 40°C (operational) |
| Temperature Stability | ±0.5°C (at 22°C setpoint) |
| Liquid Resistivity | <3,500 Ω·cm (deionized water recommended) |
| Spray Pressure | 0–10 bar (adjustable) |
| Flow Rate | 0–15 L/min (per nozzle) |
| Power Supply | 230V AC, 50/60Hz (single-phase) |
| Dimensions | 2,500mm (W) × 1,200mm (D) × 1,500mm (H) |
| Weight | 350 kg (net) / 450 kg (gross) |
Accessories Included
- Testing Kit:
- 4x PV module test fixtures (adjustable for frameless/framed modules).
- 10x insulated test leads with alligator clips.
- Software Suite:
- License key forLeakTest Pro(Windows/Linux).
- 1-year free access to cloud-based I-V curve analyzer.
- Calibration & Safety:
- NIST-traceable conductivity meter.
- Emergency eyewash station (wall-mounted).
- Maintenance Kit:
- Spare acrylic tank seal and nozzle gaskets.
- Tank cleaning solution (non-corrosive).
- Documentation:
- Multilingual quick-start guide (printed + digital).
- Compliance certificates for IEC/UL/ISO standards.
Send product request
Other supplier products
 |
SCHAP Manual Crockmeter for Color Fastness Tester | Standard AATCC 8(Colorfastness to Crocking) ISO 105-X12(Textiles - Tests for Colour Fastness - Part X12: Colour Fastness to Rubbing) ASTM D5053(... |
 |
Abrasion Scrubbing Resistance Tester | Content T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests f... |
 |
Rapid crack growth testing machine | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid c... |
 |
Fabric Vertical Flame Spread Performance Tester | Fabric Vertical Flame Spread Performance Tester - Flammability Testing equipment price quotation - standard Standards: GB/T 5456-2009 Textiles-... |
 |
Helmet Visor High-Speed Pellet Impact Tester/ Helmet visor high-speed impact tester/ Visor ballistic impact tester | Introduction: In critical environments, from motorsports and tactical operations to industrial safety and extreme sports, a helmet's visor isn't... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
